Properties
On the [Properties] screen, you can confirm or change the scanner's properties.
[Machine Details]
Displays the product name and serial number of the scanner. This also allows you to set the scanner name, installation location, contact person, and the administrator e-mail address.
[Configuration]
Displays the specifications of the scanner.
[Counters]
Displays the number of scanned pages to date.
[Initialization]
Initializes the NV memory.
[Internet Services Settings]
Sets the parameters for CentreWare Internet Services.
[Port Status]
Sets whether or not to enable each port.
Port Settings:
Protocol Settings:
The following explains how to navigate the [Properties] screen.
Navigating the [Properties] Screen
To display the setting screen:
Procedure
- Select an item you want to confirm or configure in the left frame. If the items below each folder are not displayed, click the [+] sign on the left of each folder.
The setting for the item is displayed in the right frame.
To change the settings:
Procedure
- The settings can be changed on the drop-down menus, text boxes, and check boxes.
The current settings on the drop-down menus are indicated with an asterisk (*).
Some items limit the amount of information that can be entered by specific amount of bytes. It takes 1 byte to express one half-size (hankaku) character and 2 bytes to express one full-size (zenkaku) character.
- When you are finished with the settings, click the [Apply New Settings] button at the bottom of the right frame.
The new settings are transferred and applied to the scanner.
If you change the settings of certain items, a message saying "Reboot system for new settings to take effect." appears. If the message appears, switch the scanner off and then on again to apply the new settings.
You may also be prompted to enter an administrator ID and password. If prompted, enter the administrator ID and password set under [Internet Services Settings].