Protocol Settings - Port9100

This page allows you to configure the following settings for Port9100 (Raw Data Socket).

Port Number
Enter the port number of the printer between 9000 and 9999. The default value is 9100.
The setting for this item will be valid only when the device is restarted. Click the [Apply New Settings and Reboot Device] button to restart the device.

Time-out
Specifies the time from the receiving of data, failed transmission of data until the connection is cut. Enter the connection time-out period between 1 and 1000 second(s).

Transport Protocol - TCP/IP
To change the TCP/IP settings, click [TCP/IP] on the page. [TCP/IP] page is displayed.

IP Filter
To set the IP Filter settings, click [IP Filter]. The [IP Filter] page is displayed.

[Apply New Settings] button
[Apply New Settings and Reboot Device] button
[Restore Settings] button
[Refresh] button