[AirPrint™]
This setting takes effect after the printer is restarted from Internet Services, or is turned off and then on again from the printer's control panel.
[Enable]
Set whether to enable the use of AirPrint on the printer. If you enable AirPrint, Bonjour (mDNS) and IPP protocol are also enabled.
[USB Connection]
This item is displayed when the use of AirPrint on the printer is enabled.
Set whether to enable USB port connection on the printer.
[System]
Displays the version of the ROM on the controller.
[Bonjour]
This item is displayed when the use of AirPrint on the printer is enabled.
[Printer Name]
Enter the name of the service to be used for multicast DNS.
[Location]
Enter the location of the printer.
[Latitude]/[Longitude]
Enter the location where the printer is actually installed.
[IPP Authentication]
This item is displayed when the use of AirPrint on the printer is enabled.
[Basic Authentication]
Set whether to enable the authentication feature for AirPrint.
[User Name]
This item is displayed when [Basic Authentication] is enabled.
Enter the user name for AirPrint. It cannot contain control characters.
[Password]
This item is displayed when [Basic Authentication] is enabled.
Enter the password. It cannot contain control characters.
[Retype Password]
Enter the same string as that you entered in [Password].
[Certificate Settings]
This item is displayed when the use of AirPrint on the printer is enabled.
Clicking [Edit] displays the [Certificate Settings] dialog box.
[Software Update]
Clicking [Edit and Check Now] displays the [Software Update] screen.
For more information, see [Software Update].
[Supplies]
This item is displayed when the use of AirPrint on the printer is enabled.
Click [Check Status] displays detailed information about [Supplies].
[Print Job Handling when Data Error Occurs]
Set whether to quit printing when an error is detected.