[Wi-Fi]
Set up the communication environment that uses Wi-Fi.
This setting takes effect after the printer is restarted from Internet Services, or is turned off and then on again from the printer's control panel.
[Enable]
Set whether to boot the Wi-Fi port.
[Network Name]
Set the distinguished name of the wireless network.
[MAC Address]
Displays the current MAC address if the printer is connected to the wireless network.
[Link Channel]
Displays the number of the connection destination channel if the printer is connected to the wireless network.
[Link Quality]
Displays the status of the communication if the printer is connected to the wireless network.
[Operating Frequency Band]
Select the band of operating frequencies.
[SSID]
Set the SSID of wireless network.
[TCP/IP Settings]
Configure each of the TCP/IP settings. For more information on the settings, see [Ethernet].
[Security Settings]
[Encryption]
Set the security method. To choose not to use encryption, select [No Encryption].
♦ When [WPA3 Personal], [WPA2/WPA3 Personal], [WPA2 Personal] or [WPA/WPA2 Personal] is selected in [Encryption Settings].
[Passphrase]
Set the passphrase to use.
[Retype Passphrase]
Enter the same passphrase as that you entered in [Passphrase].
♦ When [WPA3 Enterprise], [WPA2/WPA3 Enterprise], [WPA2 Enterprise] or [WPA/WPA2 Enterprise] is selected in [Encryption Settings].
[Authentication Method]
Set the authentication method for EAP.
[Root Certificate]
Set the certificate to use.
[Client Certificate]
When the authentication method is set to EAP-TLS, set the client certificate to use.
[Identity]
Enter the EAP-Identity.
[User Name]
Enter the login user name for WPA-Enterprise authentication.
This item is displayed when Authentication Method is set to other than EAP-TLS.
[Password]
Enter the password for WPA-Enterprise. This field cannot be left blank.
This item is displayed when Authentication Method is set to other than EAP-TLS.
[Retype Password]
Enter the same string as that you entered in [Password].
This item is displayed when Authentication Method is set to other than EAP-TLS.
♦ When [WEP] is selected in [Encryption Settings]
[Transmit Key]
Set the WEP key to use.
[WEP Key 1] to [WEP Key 4]
Enter the WEP key.
[Retype WEP Key 1] to [Retype WEP Key 4]
Enter the same WEP key as that you entered for the corresponding WEP key.