[POP3] Dialog Box

You can configure the settings for POP3.

[IP Address/Host Name : Port]

Enter the address of the incoming e-mail server to be connected via POP3 protocol and the port number.

• Text Box on the Left

  Enter the address of the incoming e-mail server to be connected via POP3 protocol. The following characters can be entered:
• IP address or FQDN (Fully Qualified Domain Name) format
• Up to 63 bytes (single-byte only)
• Alphanumeric characters, periods (.), and hyphens (-)

• Text Box on the Right

  Enter the port number to be used on the POP3 server.

[Password Encryption]

Specify whether to encrypt the password.

[User Name]

Enter the user name for the incoming e-mail server. The following characters can be entered:

• Up to 63 bytes (single-byte only)
• Alphanumeric characters, periods (.), hyphens (-), underscores (_), and the @ mark

[Password]

Enter the password for the incoming e-mail server. A null cannot be set. The following characters can be entered:

• Up to 31 bytes (single-byte only)
• Alphanumeric characters and symbols

[Retype Password]

Enter the same character string in [Password].

[Polling Interval]

Enter the time interval for polling.

[Permitted Email Address]

[StatusMessenger Password]

[Print Job Password]

∧