[AirPrint]

[AirPrint]

[Enable AirPrint]

Specify whether to enable the printer for AirPrint. Bonjour (mDNS) and IPP protocols are also available when AirPrint is enabled.

[Enable USB]

Specify whether to enable the printer for USB port connection. This setting is not available when [Enable AirPrint] is not selected.

[Bonjour]

[Name]

Enter the service name to be used on Multicast DNS. The following characters can be entered:

• Up to 63 bytes (single-byte only)

[Location]

Enter the name of the location of the printer. The following characters can be entered:

• Up to 63 bytes (single-byte only)

[Geo-Location]

Enter the physical location of the printer. The following characters can be entered:

• Up to 128 bytes (single-byte only)

[IPP Authentication]

[Basic Authentication]

Specify whether to enable the authentication function for AirPrint.

[User Name]

Enter the user name for AirPrint. Control characters are not available. The following characters can be entered:

• Up to 32 bytes (single-byte only)
• Alphanumeric characters, symbols, and spaces

[Password]

Enter the password. Control characters are not available. The following characters can be entered:

• Up to 32 bytes
• Alphanumeric characters, symbols, and spaces

[Scan]

[Connection Timeout]

Enter the connection timeout period of AirPrint scan.

[SSL/TLS]

[SSL/TLS]

Clicking [Settings] displays the [SSL/TLS Server Communication] page in [Security].

[Components]

Displays the remaining amount of each consumable component.