-- WA Product Vendor MIB R6.0
-- From file: "WA-SMI"

-- Copyright (c) NEC Platforms, Ltd. 2011-2015. All rights reserved.

-- Update History
--
-- 2011/06/30  : R1.0 1st release
-- 2011/10/11  : R1.1 added RSSI, CINR, BSID of WiMAX device
-- 2012/06/18  : R1.2 added ServiceMode MIB to Mobile3g
-- 2012/07/17  : R2.0 added WA2021 Product
-- 2014/01/23  : R3.0 added WA1500 Product and MobileEthernet Status MIB
-- 2015/03/16  : R4.0 added WA2600 Product
-- 2015/09/18  : R5.0 added Switching Hub Status MIB and Switching Hub TRAP
-- 2019/03/28  : R5.1 added CPU, Heap, Packet Filter, Napt and Mobile Packets Status
-- 2019/09/02  : R5.2 added TAC and CellId Status
-- 2021/07/01  : R6.0 added WA2510 Product

WA-SMI DEFINITIONS ::= BEGIN

   IMPORTS
	MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, enterprises, Gauge32, Counter32
		FROM SNMPv2-SMI
	PhysAddress, TimeStamp, DisplayString
		FROM SNMPv2-TC;

-- The following definition is privately defined for wa Private MIB

-- org         OBJECT IDENTIFIER     ::= { iso 3 }
-- dod         OBJECT IDENTIFIER     ::= { org 6 }
-- internet    OBJECT IDENTIFIER     ::= { dod 1 }
-- private     OBJECT IDENTIFIER     ::= { internet 4 }
-- enterprises OBJECT IDENTIFIER     ::= { private 1 }
   nec         OBJECT IDENTIFIER     ::= { enterprises 119}


-- sysObjectID 
--
--		The WA Software Products.
--

   necProduct        OBJECT IDENTIFIER ::= { nec 1 }
   wa                OBJECT IDENTIFIER ::= { necProduct 194 }
   wa1000-Series     OBJECT IDENTIFIER ::= { wa 1 }
   wa2000-Series     OBJECT IDENTIFIER ::= { wa 3 }
   wa1500-Series     OBJECT IDENTIFIER ::= { wa 4 }
   wa2600-Series     OBJECT IDENTIFIER ::= { wa 5 }
   wa2500-Series     OBJECT IDENTIFIER ::= { wa 6 }

--
-- This sysObjectID is based on WA1000 series.
--
   wa1020            OBJECT IDENTIFIER ::= { wa1000-Series 1 }

--
-- This sysObjectID is based on WA2000 series.
--
   wa2020            OBJECT IDENTIFIER ::= { wa2000-Series 1 }
   wa2021            OBJECT IDENTIFIER ::= { wa2000-Series 2 }

--
-- This sysObjectID is based on WA1500 series.
--
   wa1500            OBJECT IDENTIFIER ::= { wa1500-Series 1 }

--
-- This sysObjectID is based on WA2500 series.
--
   wa2510            OBJECT IDENTIFIER ::= { wa2500-Series 3 }

--
-- This sysObjectID is based on WA2600 series.
--
   wa2600            OBJECT IDENTIFIER ::= { wa2600-Series 1 }

-- nec MIB	
   nec-mib           OBJECT IDENTIFIER ::= { nec 2 }
   necProductDepend  OBJECT IDENTIFIER ::= { nec-mib 3 }

--
-- wa Private MIB
--
   wa-mib                 OBJECT IDENTIFIER ::= { necProductDepend 194 }
   waSystem               OBJECT IDENTIFIER ::= { wa-mib 1 }

--  Equipment Temparature MIB
	waTemperature OBJECT IDENTIFIER ::= { waSystem 1 }

	waCelsius OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	optional
		DESCRIPTION
			"Indicates the temperature of the equipment inside,
			 in degree (Celusius)."
		::= { waTemperature 1 }

--  Equipment USB MIB
	waDeviceUSBTable OBJECT-TYPE
		SYNTAX	SEQUENCE OF WADeviceUSBEntry
		ACCESS	not-accessible
		STATUS	mandatory
		DESCRIPTION
			"The table of Mobile USB Status."
		::= { waSystem 2 }

	waDeviceUSBEntry OBJECT-TYPE
		SYNTAX	WADeviceUSBEntry
		ACCESS	not-accessible
		STATUS	mandatory
		DESCRIPTION
			"Mobile USB Status entry."
		INDEX	{ waDeviceUSBIndex }
		::= { waDeviceUSBTable 1 }

	WADeviceUSBEntry ::=
		SEQUENCE {
			waDeviceUSBIndex
				INTEGER,
			waDeviceUSBAttachRecovery
				INTEGER
		}

	waDeviceUSBIndex OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Unique index for each usb device."
		::= { waDeviceUSBEntry 1 }    

	waDeviceUSBAttachRecovery OBJECT-TYPE
		SYNTAX	INTEGER { enabled(1), disabled(2) }
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Mode of mobile attachment recovery information."
		::= { waDeviceUSBEntry 2 }    

--  Utilization MIB
	waUtilizationStatus OBJECT IDENTIFIER ::= { waSystem 3 }

	waCpuUtilization OBJECT-TYPE
		SYNTAX	Gauge
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"CPU Load Average Utilization."
		::= { waUtilizationStatus 1 }

	waHeapSize OBJECT-TYPE
		SYNTAX	Gauge
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Indicates the observed total heap size,
			 in bytes."
		::= { waUtilizationStatus 2 }

	waHeapUtilization OBJECT-TYPE
		SYNTAX	Gauge
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Indicates the observed current heap utilization,
			 in percent (%)."
		::= { waUtilizationStatus 3 }

	waPacketFilterCacheNumber OBJECT-TYPE
		SYNTAX	Gauge
		ACCESS	read-only
		STATUS	optional
		DESCRIPTION
			"Total Packet Filter Cache used Number."
		::= { waUtilizationStatus 4 }

	waPacketFilterCacheUtilization OBJECT-TYPE
		SYNTAX	Gauge
		ACCESS	read-only
		STATUS	optional
		DESCRIPTION
			"Total Packet Filter Cache Utilization."
		::= { waUtilizationStatus 5 }

	waNaptCacheNumber OBJECT-TYPE
		SYNTAX	Gauge
		ACCESS	read-only
		STATUS	optional
		DESCRIPTION
			"Nat and Napt Cache used Number."
		::= { waUtilizationStatus 6 }

	waNaptCacheUtilization OBJECT-TYPE
		SYNTAX	Gauge
		ACCESS	read-only
		STATUS	optional
		DESCRIPTION
			"Nat and Napt Cache Utilization."
		::= { waUtilizationStatus 7 }

	waFilterCacheNumber OBJECT-TYPE
		SYNTAX	Gauge
		ACCESS	read-only
		STATUS	optional
		DESCRIPTION
			"Total Packet Filter Cache used Number."
		::= { waUtilizationStatus 8 }

	waFilterCacheUtilization OBJECT-TYPE
		SYNTAX	Gauge
		ACCESS	read-only
		STATUS	optional
		DESCRIPTION
			"Total Packet Filter Cache Utilization."
		::= { waUtilizationStatus 9 }

-- Mobile 3G Status MIB
	waMobile3gTable OBJECT-TYPE
		SYNTAX	SEQUENCE OF WAMobile3gEntry
		ACCESS	not-accessible
		STATUS	mandatory
		DESCRIPTION
			"The table of Mobile 3G Status."
		::= { wa-mib 2 }

	waMobile3gEntry OBJECT-TYPE
		SYNTAX	WAMobile3gEntry
		ACCESS	not-accessible
		STATUS	mandatory
		DESCRIPTION
			"Mobile 3G Status entry."
		INDEX	{ waMobile3gIndex }
		::= { waMobile3gTable 1 }

	WAMobile3gEntry ::=
		SEQUENCE {
			waMobile3gIndex
				INTEGER,
			waMobile3gLinkedInterfaceOid
				OBJECT IDENTIFIER,
			waMobile3gModemName
				DisplayString,
			waMobile3gVersion
				DisplayString,
			waMobile3gSerialNumber
				DisplayString,
			waMobile3gPhoneNumber
				DisplayString,
			waMobile3gUsbSpeed
				INTEGER,
			waMobile3gPinOperationStatus
				DisplayString,
            waMobile3gPinOperationAuth
				INTEGER,
            waMobile3gPinOperationFail
				INTEGER,
			waMobile3gAntennaLevel
				DisplayString,
			waMobile3gServiceMode
				DisplayString,
			waMobile3gServiceArea
				DisplayString,
            waMobile3gAntennaLastUpdateLevelBefore
				DisplayString,
            waMobile3gAntennaLastUpdateLevelAfter
				DisplayString,
            waMobile3gAntennaLastUpdateDate
				DisplayString,
			waMobile3gRecoveryDone
				INTEGER,
			waMobile3gModeChangeRetry
				INTEGER,
			waMobile3gErrorInformationStatus
				DisplayString,
            waMobile3gErrorInformationDeadCount
				INTEGER,
            waMobile3gErrorInformationSimError
				INTEGER,
            waMobile3gErrorInformationAntennaError
				INTEGER,
            waMobile3gDetectInformationManagedInterfaceOid
				OBJECT IDENTIFIER,
            waMobile3gDetectInformationProtocolStatus
				INTEGER,
            waMobile3gDetectInformationLinkStatus
				INTEGER,
            waMobile3gAutoRecoveryMode
				INTEGER,
            waMobile3gInterfaceStatus
				INTEGER,
			waMobile3gPacketsToday
				Counter32,
			waMobile3gPacketsYesterday
				Counter32,
			waMobile3gPacketsThisMonth
				Counter32,
			waMobile3gPacketsLastMonth
				Counter32,
			waMobile3gAntennaLevel-I
				INTEGER,
			waMobile3gImsi
				DisplayString,
			waMobile3gTac
				DisplayString,
			waMobile3gCellId
				DisplayString
		}

	waMobile3gIndex OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Unique index for each mobile 3G status."
		::= { waMobile3gEntry 1 }

	waMobile3gLinkedInterfaceOid OBJECT-TYPE
		SYNTAX	OBJECT IDENTIFIER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"ObjectID for mobile 3G link interface."
		::= { waMobile3gEntry 2 }

	waMobile3gModemName OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about mobile 3G modem name."
		::= { waMobile3gEntry 3 }

	waMobile3gVersion OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about mobile 3G version."
		::= { waMobile3gEntry 4 }

	waMobile3gSerialNumber OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about mobile 3G sereal number."
		::= { waMobile3gEntry 5 }

	waMobile3gPhoneNumber OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about mobile 3G phone number."
		::= { waMobile3gEntry 6 }

	waMobile3gUsbSpeed OBJECT-TYPE
		SYNTAX  INTEGER { unknown(0), low(1), full(2), high(3) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Indicates the observed system utilization
			 for mobile 3G USB speed."
		::= { waMobile3gEntry 7 }

	waMobile3gPinOperationStatus OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about status for mobile 3G PIN operation."
		::= { waMobile3gEntry 8 }    

	waMobile3gPinOperationAuth OBJECT-TYPE
		SYNTAX	INTEGER { unknown(0), notdone(1), done(2) }
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Auth of mobile 3G PIN operation."
		::= { waMobile3gEntry 9 }    

	waMobile3gPinOperationFail OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Fail count of mobile 3G PIN operation."
		::= { waMobile3gEntry 10 }    

	waMobile3gAntennaLevel OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Antenna level for mobile 3G."
		::= { waMobile3gEntry 11 }

	waMobile3gServiceMode OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Service mode for mobile 3G."
		::= { waMobile3gEntry 12 }

	waMobile3gServiceArea OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Service area for mobile 3G."
		::= { waMobile3gEntry 13 }

	waMobile3gAntennaLastUpdateLevelBefore OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Antenna before level for mobile 3G."
		::= { waMobile3gEntry 14 }    

	waMobile3gAntennaLastUpdateLevelAfter OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Antenna after level for mobile 3G."
		::= { waMobile3gEntry 15 }    

	waMobile3gAntennaLastUpdateDate OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about date for mobile 3G."
		::= { waMobile3gEntry 16 }    

	waMobile3gRecoveryDone OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Recovery count for mobile 3G."
		::= { waMobile3gEntry 17 }

	waMobile3gModeChangeRetry OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Mode change retry count for mobile 3G."
		::= { waMobile3gEntry 18 }

	waMobile3gErrorInformationStatus OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Status for mobile 3G error information."
		::= { waMobile3gEntry 19 }

	waMobile3gErrorInformationDeadCount OBJECT-TYPE
		SYNTAX  INTEGER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Dead count for mobile 3G error information."
		::= { waMobile3gEntry 20 }

	waMobile3gErrorInformationSimError OBJECT-TYPE
		SYNTAX  INTEGER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Sim Error for mobile 3G error information."
		::= { waMobile3gEntry 21 }

	waMobile3gErrorInformationAntennaError OBJECT-TYPE
		SYNTAX  INTEGER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Antenna Error for mobile 3G error information."
		::= { waMobile3gEntry 22 }

	waMobile3gDetectInformationManagedInterfaceOid OBJECT-TYPE
		SYNTAX  OBJECT IDENTIFIER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Manage interface OID for mobile 3G detect information."
		::= { waMobile3gEntry 23 }

	waMobile3gDetectInformationProtocolStatus OBJECT-TYPE
		SYNTAX  INTEGER { notsupport(0), down(1), up(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Protocol status for mobile 3G detect information."
		::= { waMobile3gEntry 24 }

	waMobile3gDetectInformationLinkStatus OBJECT-TYPE
		SYNTAX  INTEGER { notsupport(0), down(1), up(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Link status for mobile 3G detect information."
		::= { waMobile3gEntry 25 }

	waMobile3gAutoRecoveryMode OBJECT-TYPE
		SYNTAX  INTEGER { enabled(1), disabled(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Mode of mobile 3G auto recovery information."
		::= { waMobile3gEntry 26 }

	waMobile3gInterfaceStatus OBJECT-TYPE
		SYNTAX  INTEGER { not-applicable(0), shutdown(1), no-shutdown(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Status of interface operation for mobile 3G."
		::= { waMobile3gEntry 27 }

	waMobile3gPacketsToday OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Packets Information."
		::= { waMobile3gEntry 28 }

	waMobile3gPacketsYesterday OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Packets Information."
		::= { waMobile3gEntry 29 }

	waMobile3gPacketsThisMonth OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Packets Information."
		::= { waMobile3gEntry 30 }

	waMobile3gPacketsLastMonth OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Packets Information."
		::= { waMobile3gEntry 31 }

	waMobile3gAntennaLevel-I OBJECT-TYPE
		SYNTAX  INTEGER {
				unknown(-1),
				out-range(0),
				weak(1),
				low(2),
				middle(3),
				high(4)
			}
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Antenna level for mobile 3G."
		::= { waMobile3gEntry 32 }

	waMobile3gImsi OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"IMSI Information."
		::= { waMobile3gEntry 33 }

	waMobile3gTac OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"TAC Information."
		::= { waMobile3gEntry 34 }

	waMobile3gCellId OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Cell ID Information."
		::= { waMobile3gEntry 35 }

-- WiMAX status MIB
	waWimaxTable OBJECT-TYPE
		SYNTAX	SEQUENCE OF WAWimaxEntry
		ACCESS	not-accessible
		STATUS	mandatory
		DESCRIPTION
			"The table of WiMAX status."
		::= { wa-mib 3 }

	waWimaxEntry OBJECT-TYPE
		SYNTAX	WAWimaxEntry
		ACCESS	not-accessible
		STATUS	mandatory
		DESCRIPTION
			"WiMAX entry."
		INDEX	{ waWimaxIndex }
		::= { waWimaxTable 1 }

	WAWimaxEntry ::=
		SEQUENCE {
			waWimaxIndex
				INTEGER,
			waWimaxLinkedInterfaceOid
				OBJECT IDENTIFIER,
			waWimaxCardName
				DisplayString,
			waWimaxVersion
				DisplayString,
			waWimaxMacAddress
				PhysAddress,
			waWimaxAntennaCurrentLevel
				Gauge,
            waWimaxRunningInformationState
                DisplayString,
            waWimaxRunningInformationMode
                INTEGER,
            waWimaxDetectInformationManagedInterfaceOid
                OBJECT IDENTIFIER,
            waWimaxDetectInformationProtocolStatus
                INTEGER,
            waWimaxDetectInformationLinkStatus
                INTEGER,
            waWimaxAutoRecoveryMode
                INTEGER,
			waWimaxBsid
				DisplayString,
			waWimaxRssi
				Integer32,
			waWimaxCinr
				Integer32,
            waWimaxInterfaceStatus
				INTEGER
		}

	waWimaxIndex OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Unique index for each WiMAX status."
		::= { waWimaxEntry 1 }

	waWimaxLinkedInterfaceOid OBJECT-TYPE
		SYNTAX	OBJECT IDENTIFIER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"ObjectID for WiMAX link interface."
		::= { waWimaxEntry 2 }

	waWimaxCardName OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about WiMAX card name."
		::= { waWimaxEntry 3 }

	waWimaxVersion OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about WiMAX version."
		::= { waWimaxEntry 4 }

	waWimaxMacAddress OBJECT-TYPE
		SYNTAX  PhysAddress
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A octet string containing information
			 about MAC address."
		::= { waWimaxEntry 5 }

	waWimaxAntennaCurrentLevel OBJECT-TYPE
		SYNTAX	Gauge
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Antenna current level for WiMAX."
		::= { waWimaxEntry 6 }

	waWimaxRunningInformationState OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"A textual string containing information
			 about WiMAX running information."
		::= { waWimaxEntry 7 }    

	waWimaxRunningInformationMode OBJECT-TYPE
		SYNTAX	INTEGER { unknown(0), router(1), adapter(2) }
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Mode of WiMAX running information."
		::= { waWimaxEntry 8 }    

	waWimaxDetectInformationManagedInterfaceOid OBJECT-TYPE
		SYNTAX  OBJECT IDENTIFIER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Manage interface OID for WiMAX detect information."
		::= { waWimaxEntry 9 }    

	waWimaxDetectInformationProtocolStatus OBJECT-TYPE
		SYNTAX  INTEGER { notsupport(0), down(1), up(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Protocol status for WiMAX detect information."
		::= { waWimaxEntry 10 }    

	waWimaxDetectInformationLinkStatus OBJECT-TYPE
		SYNTAX  INTEGER { notsupport(0), down(1), up(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Link status for WiMAX detect information."
		::= { waWimaxEntry 11 }    

	waWimaxAutoRecoveryMode OBJECT-TYPE
		SYNTAX  INTEGER { enabled(1), disabled(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Mode of WiMAX auto recovery information."
		::= { waWimaxEntry 12 }    

	waWimaxBsid OBJECT-TYPE
		SYNTAX  DisplayString
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"BSID for WiMAX."
		::= { waWimaxEntry 13 }

	waWimaxRssi OBJECT-TYPE
		SYNTAX  Integer32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"RSSI for WiMAX."
		::= { waWimaxEntry 14 }

	waWimaxCinr OBJECT-TYPE
		SYNTAX  Integer32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"CINR for WiMAX."
		::= { waWimaxEntry 15 }

	waWimaxInterfaceStatus OBJECT-TYPE
		SYNTAX  INTEGER { not-applicable(0), shutdown(1), no-shutdown(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Status of interface operation for WiMAX."
		::= { waWimaxEntry 16 }

-- MobileEthernet Status MIB
	waMobileEthernetTable OBJECT-TYPE
		SYNTAX	SEQUENCE OF WAMobileEthernetEntry
		ACCESS	not-accessible
		STATUS	mandatory
		DESCRIPTION
			"The table of MobileEthernet Status."
		::= { wa-mib 4 }

	waMobileEthernetEntry OBJECT-TYPE
		SYNTAX	WAMobileEthernetEntry
		ACCESS	not-accessible
		STATUS	mandatory
		DESCRIPTION
			"MobileEthernet Status entry."
		INDEX	{ waMobileEthernetIndex }
		::= { waMobileEthernetTable 1 }

	WAMobileEthernetEntry ::=
		SEQUENCE {
			waMobileEthernetIndex
				INTEGER,
			waMobileEthernetLinkedInterfaceOid
				OBJECT IDENTIFIER,
			waMobileEthernetModemName
				DisplayString,
			waMobileEthernetVersion
				DisplayString,
			waMobileEthernetSerialNumber
				DisplayString,
			waMobileEthernetPhoneNumber
				DisplayString,
			waMobileEthernetUsbSpeed
				INTEGER,
			waMobileEthernetPinOperationStatus
				DisplayString,
            waMobileEthernetPinOperationAuth
				INTEGER,
            waMobileEthernetPinOperationFail
				INTEGER,
			waMobileEthernetAntennaLevel
				DisplayString,
			waMobileEthernetServiceMode
				DisplayString,
			waMobileEthernetServiceArea
				DisplayString,
            waMobileEthernetAntennaLastUpdateLevelBefore
				DisplayString,
            waMobileEthernetAntennaLastUpdateLevelAfter
				DisplayString,
            waMobileEthernetAntennaLastUpdateDate
				DisplayString,
			waMobileEthernetRecoveryDone
				INTEGER,
			waMobileEthernetModeChangeRetry
				INTEGER,
			waMobileEthernetErrorInformationStatus
				DisplayString,
            waMobileEthernetErrorInformationDeadCount
				INTEGER,
            waMobileEthernetErrorInformationSimError
				INTEGER,
            waMobileEthernetErrorInformationAntennaError
				INTEGER,
            waMobileEthernetDetectInformationManagedInterfaceOid
				OBJECT IDENTIFIER,
            waMobileEthernetDetectInformationProtocolStatus
				INTEGER,
            waMobileEthernetDetectInformationLinkStatus
				INTEGER,
            waMobileEthernetAutoRecoveryMode
				INTEGER,
            waMobileEthernetInterfaceStatus
				INTEGER,
			waMobileEthernetPacketsToday
				Counter32,
			waMobileEthernetPacketsYesterday
				Counter32,
			waMobileEthernetPacketsThisMonth
				Counter32,
			waMobileEthernetPacketsLastMonth
				Counter32,
			waMobileEthernetAntennaLevel-I
				INTEGER,
			waMobileEthernetImsi
				DisplayString,
			waMobileEthernetTac
				DisplayString,
			waMobileEthernetCellId
				DisplayString
		}

	waMobileEthernetIndex OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Unique index for each MobileEthernet status."
		::= { waMobileEthernetEntry 1 }

	waMobileEthernetLinkedInterfaceOid OBJECT-TYPE
		SYNTAX	OBJECT IDENTIFIER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"ObjectID for MobileEthernet link interface."
		::= { waMobileEthernetEntry 2 }

	waMobileEthernetModemName OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about MobileEthernet modem name."
		::= { waMobileEthernetEntry 3 }

	waMobileEthernetVersion OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about MobileEthernet version."
		::= { waMobileEthernetEntry 4 }

	waMobileEthernetSerialNumber OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about MobileEthernet sereal number."
		::= { waMobileEthernetEntry 5 }

	waMobileEthernetPhoneNumber OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about MobileEthernet phone number."
		::= { waMobileEthernetEntry 6 }

	waMobileEthernetUsbSpeed OBJECT-TYPE
		SYNTAX  INTEGER { unknown(0), low(1), full(2), high(3) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Indicates the observed system utilization
			 for MobileEthernet USB speed."
		::= { waMobileEthernetEntry 7 }

	waMobileEthernetPinOperationStatus OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about status for MobileEthernet PIN operation."
		::= { waMobileEthernetEntry 8 }

	waMobileEthernetPinOperationAuth OBJECT-TYPE
		SYNTAX	INTEGER { unknown(0), notdone(1), done(2) }
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Auth of MobileEthernet PIN operation."
		::= { waMobileEthernetEntry 9 }

	waMobileEthernetPinOperationFail OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Fail count of MobileEthernet PIN operation."
		::= { waMobileEthernetEntry 10 }

	waMobileEthernetAntennaLevel OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Antenna level for MobileEthernet."
		::= { waMobileEthernetEntry 11 }

	waMobileEthernetServiceMode OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Service mode for MobileEthernet."
		::= { waMobileEthernetEntry 12 }

	waMobileEthernetServiceArea OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Service area for MobileEthernet."
		::= { waMobileEthernetEntry 13 }

	waMobileEthernetAntennaLastUpdateLevelBefore OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Antenna before level for MobileEthernet."
		::= { waMobileEthernetEntry 14 }

	waMobileEthernetAntennaLastUpdateLevelAfter OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Antenna after level for MobileEthernet."
		::= { waMobileEthernetEntry 15 }

	waMobileEthernetAntennaLastUpdateDate OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about date for MobileEthernet."
		::= { waMobileEthernetEntry 16 }

	waMobileEthernetRecoveryDone OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Recovery count for MobileEthernet."
		::= { waMobileEthernetEntry 17 }

	waMobileEthernetModeChangeRetry OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"Mode change retry count for MobileEthernet."
		::= { waMobileEthernetEntry 18 }

	waMobileEthernetErrorInformationStatus OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Status for MobileEthernet error information."
		::= { waMobileEthernetEntry 19 }

	waMobileEthernetErrorInformationDeadCount OBJECT-TYPE
		SYNTAX  INTEGER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Dead count for MobileEthernet error information."
		::= { waMobileEthernetEntry 20 }

	waMobileEthernetErrorInformationSimError OBJECT-TYPE
		SYNTAX  INTEGER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Sim Error for MobileEthernet error information."
		::= { waMobileEthernetEntry 21 }

	waMobileEthernetErrorInformationAntennaError OBJECT-TYPE
		SYNTAX  INTEGER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Antenna Error for MobileEthernet error information."
		::= { waMobileEthernetEntry 22 }

	waMobileEthernetDetectInformationManagedInterfaceOid OBJECT-TYPE
		SYNTAX  OBJECT IDENTIFIER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Manage interface OID for MobileEthernet detect information."
		::= { waMobileEthernetEntry 23 }

	waMobileEthernetDetectInformationProtocolStatus OBJECT-TYPE
		SYNTAX  INTEGER { notsupport(0), down(1), up(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Protocol status for MobileEthernet detect information."
		::= { waMobileEthernetEntry 24 }

	waMobileEthernetDetectInformationLinkStatus OBJECT-TYPE
		SYNTAX  INTEGER { notsupport(0), down(1), up(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Link status for MobileEthernet detect information."
		::= { waMobileEthernetEntry 25 }

	waMobileEthernetAutoRecoveryMode OBJECT-TYPE
		SYNTAX  INTEGER { enabled(1), disabled(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Mode of MobileEthernet auto recovery information."
		::= { waMobileEthernetEntry 26 }

	waMobileEthernetInterfaceStatus OBJECT-TYPE
		SYNTAX  INTEGER { not-applicable(0), shutdown(1), no-shutdown(2) }
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Status of interface operation for MobileEthernet."
		::= { waMobileEthernetEntry 27 }

	waMobileEthernetPacketsToday OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Packets Information."
		::= { waMobileEthernetEntry 28 }

	waMobileEthernetPacketsYesterday OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Packets Information."
		::= { waMobileEthernetEntry 29 }

	waMobileEthernetPacketsThisMonth OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Packets Information."
		::= { waMobileEthernetEntry 30 }

	waMobileEthernetPacketsLastMonth OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Packets Information."
		::= { waMobileEthernetEntry 31 }

	waMobileEthernetAntennaLevel-I OBJECT-TYPE
		SYNTAX  INTEGER {
				unknown(-1),
				out-range(0),
				weak(1),
				low(2),
				middle(3),
				high(4)
			}
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Antenna level for MobileEthernet."
		::= { waMobileEthernetEntry 32 }

	waMobileEthernetImsi OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"IMSI Information."
		::= { waMobileEthernetEntry 33 }

	waMobileEthernetTac OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"TAC Information."
		::= { waMobileEthernetEntry 34 }

	waMobileEthernetCellId OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"CELL ID Information."
		::= { waMobileEthernetEntry 35 }

-- Switching Hub Status MIB
	waExtIfTable OBJECT-TYPE
		SYNTAX	SEQUENCE OF WAExtIfEntry
		ACCESS	not-accessible
		STATUS	mandatory
		DESCRIPTION
			"The table of Switching Hub Status."
		::= { wa-mib 5 }

	waExtIfEntry OBJECT-TYPE
		SYNTAX	WAExtIfEntry
		ACCESS	not-accessible
		STATUS	mandatory
		DESCRIPTION
			"Switching Hub Status entry."
		INDEX	{ waExtIfInstalledSlot }
		::= { waExtIfTable 1 }

	WAExtIfEntry ::=
		SEQUENCE {
			waExtIfInstalledSlot
				INTEGER,
			waExtIfIndex
				INTEGER,
			waExtIfDescr
				DisplayString,
			waExtIfUpperLayer
				INTEGER,
			waExtIfType
				INTEGER,
			waExtIfVlanType
				INTEGER,
			waExtIfSpeed
				Gauge32,
			waExtIfDuplex
				INTEGER,
			waExtIfEffectiveMtu
				INTEGER,
			waExtIfPhysicalAddress
				PhysAddress,
			waExtIfAdminStatus
				INTEGER,
			waExtIfOperStatus
				INTEGER,
			waExtIfLastChange
				TimeTicks,
			waExtIfReceivedPacket
				Counter32,
			waExtIfReceivedDiscard
				Counter32,
			waExtIfSendPacket
				Counter32
		}

	waExtIfInstalledSlot OBJECT-TYPE
		SYNTAX	INTEGER (1..16)
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"The slot number in which the extension card
			 was installed."
		::= { waExtIfEntry 1 }

	waExtIfIndex OBJECT-TYPE
		SYNTAX	INTEGER (1..32)
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"A unique value for each extension card."
		::= { waExtIfEntry 2 }

	waExtIfDescr OBJECT-TYPE
		SYNTAX  DisplayString (SIZE (0..255))
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"A textual string containing information
			 about the interface."
		::= { waExtIfEntry 3 }

	waExtIfUpperLayer OBJECT-TYPE
		SYNTAX  INTEGER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Index of interface to upper layers."
		::= { waExtIfEntry 4 }

	waExtIfType OBJECT-TYPE
		SYNTAX  INTEGER {
				ethernet-csmacd(6)
			}
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"The type of interface,, distinguished according to
			 the physical/link protocol(s) immediately `below'
			 the network layer in the protocol stack."
		::= { waExtIfEntry 5 }

	waExtIfVlanType OBJECT-TYPE
		SYNTAX  INTEGER {
				no-vlan(1),
				tagged-vlan(2),
				port-vlan(3)
			}
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Vlan type."
		::= { waExtIfEntry 6 }

	waExtIfSpeed OBJECT-TYPE
		SYNTAX	INTEGER
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"An estimate of the interface's current bandwidth
			 in bits per second."
		::= { waExtIfEntry 7 }

	waExtIfDuplex OBJECT-TYPE
		SYNTAX  INTEGER {
				halfduplex(1),
				fullduplex(2)
			}
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"The current mode of this link."
		::= { waExtIfEntry 8 }

	waExtIfEffectiveMtu OBJECT-TYPE
		SYNTAX  INTEGER
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"The size of the largest datagram which can be
			 sent/received on the interface, specified in
			 octets."
		::= { waExtIfEntry 9 }

	waExtIfPhysicalAddress OBJECT-TYPE
		SYNTAX  PhysAddress
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"The interface's address at the protocol layer
			 immediately `below' the network layer in the
			 protocol stack."
		::= { waExtIfEntry 10 }

	waExtIfAdminStatus OBJECT-TYPE
		SYNTAX  INTEGER {
				up(1),       -- ready to pass packets
				down(2),
				testing(3)   -- in some test mode
			}
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"The desired state of the interface."
		::= { waExtIfEntry 11 }

	waExtIfOperStatus OBJECT-TYPE
		SYNTAX  INTEGER {
				up(1),       -- ready to pass packets
				down(2),
				testing(3)   -- in some test mode
			}
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"The current operational state of the interface."
		::= { waExtIfEntry 12 }

	waExtIfLastChange OBJECT-TYPE
		SYNTAX  TimeTicks
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"The value of sysUpTime at the time the interface
			 entered its current operational state."
		::= { waExtIfEntry 13 }

	waExtIfReceivedPacket OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Received packets."
		::= { waExtIfEntry 14 }

	waExtIfReceivedDiscard OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Received Discard."
		::= { waExtIfEntry 15 }

	waExtIfSendPacket OBJECT-TYPE
		SYNTAX  Counter32
		ACCESS  read-only
		STATUS  mandatory
		DESCRIPTION
			"Send packets."
		::= { waExtIfEntry 16 }

--
--		TRAP Definitions
--

waExtIfLinkDown TRAP-TYPE
	ENTERPRISE	wa-mib
	VARIABLES	{ waExtIfAdminStatus, waExtIfOperStatus }
	DESCRIPTION
		"This notification is port link down status."
	::= 1

waExtIfLinkUp TRAP-TYPE
	ENTERPRISE	wa-mib
	VARIABLES	{ waExtIfAdminStatus, waExtIfOperStatus }
	DESCRIPTION
		"This notification is port link up status."
	::= 2

END