-- PICO Product Vendor MIB -- From file: "PICO-SMI" -- Copyright (c) NEC Corporation 2001-2021. All rights reserved. -- Update History -- -- 2002/12/20 : R0.1 Draft -- 2003/03/11 : R1.0 Initial release -- 2003/05/12 : R2.0 add ALBTRS Power and FAN MIB/Trap -- 2003/09/26 : R3.0 add sysObjectID ag431,ag531 -- 2003/11/10 : R4.0 add sysObjectID ix2015,ix3010 -- 2004/01/21 : R4.1 change picoFanRpm SYNTAX ( delete OutOfRange,rpm ) DESCRIPTION ( add comment ) -- 2004/02/03 : R4.2 change Trap name(picoTemperatureRestoration,picoVoltageRestoration,picoFanRestoration -- picoPowerSupplyInserted,picoPowerSupplyRemoved) -- 2004/02/03 : R5.0 add Equipment Sched MIB, Equipment Heap memory MIB -- 2004/02/05 : R6.0 change picoSched MIB, picoHeap memory MIB -- change SYNTAX picoXxxx -> PicoXxxx -- change picoPowerSupplyType -- SystemACPS(1) -> systemACPS(1) -- 802dot3af-PoE-ACPS(2) -> ieee802dot3af-PoE-ACPS(2) -- add IMPORT Gauge, etc. -- 2004/02/09 : R6.0a change nomal(1) -> normal(1) -- 2004/04/27 : R7.0 add picoLoginMIB, picoConfigEventMIB -- 2004/05/12 : R7.0a change picoLoginSessionTerminalType SYNTAX (add unknown) -- 2004/05/19 : R7.0b cosmetic change -- 2004/07/16 : R8.0 add picoExtIfMIB -- 2004/08/26 : R8.0a change PicoSwHubEntry -> picoExtIfEntry -- 2004/09/07 : R8.0b add picoExtIfLinkDown/picoExtIfLinkUp trap -- 2004/09/29 : R8.1 Added sysObjectID ix2004-Series,ag600-Series -- Added IMPORTS DisplayString -- Setted a range restriction (picoFanIndex,picoPowerSupplyIndex,picoExtIfInstalledSlot,picoExtIfIndex) -- Changed Unsigned32 -> INTEGER -- Corrected typo (s/picoExtIndex/picoExtIfIndex/) -- 2005/01/31 : R9.0 Added picoNetworkMonitorMIB -- 2005/02/28 : R9.1 Added sysObjectID ag611,ag650,ag651 -- 2006/03/02 : R9.2 add picoSchedRtUtl1Hour(4) -- 2006/07/21 : R9.3 Added sysObjectID ix2005-Series -- 2007/06/26 : R9.4 Added sysObjectID ix3100-Series -- 2008/04/09 : R9.5 Added sysObjectID rtu-Series,ix2025-Series -- 2008/05/29 : R9.6 Added ethernet-csmacd(6) for picoExtIfType -- 2010/03/12 : R9.7 Added sysObjectID ix2105-Series -- 2010/09/08 : R9.8 Changed copyright -- 2010/11/09 : R10.0 Added picoIsdnMIB -- 2011/02/02 : R10.1 Changed picoLoginSessionTerminalType SYNTAX (console -> local, telnet -> remote) -- 2011/05/30 : R11.0 Separated sysObjectID -- Corrected typographic error (picoFanRpm,picoCelsius DESCRIPTION) -- 2011/08/18 : R12.0 Added picoNgnMIB -- Added IMPORTS InterfaceIndex -- 2013/10/29 : R12.1 Added IMPORTS (ifIndex, isdnLapdOperStatus) -- 2013/12/17 : R13.0 Added picoPostMIB -- 2015/02/19 : R14.0 Added picoMobileMIB -- 2015/05/28 : R14.1 Corrected syntactic error (picoMobileMIB) -- 2015/06/08 : R15.0 add picoMobileDeviceDown/picoMobileDeviceUp/picoMobileSignalStatusChange Trap -- 2016/06/09 : R16.0 Changed picoHeapSize SYNTAX (INTEGER -> Gauge) -- 2017/07/07 : R17.0 Added picoIPv4MIB/picoIPv6MIB -- 2019/06/03 : R18.0 Added picoNAPTMIB -- 2019/06/12 : R19.0 Added picoQoSMIB -- 2021/03/23 : R19.1 Fixed syntax errors of naptCacheTable and NAPTCacheEntry. -- Fixed date of R18.0 and R19.0 in Update History. -- 2021/06/25 : R19.2 Fixed llq and cbq order errors(QoS MIB) -- 2022/03/07 : R19.3 Corrected Coutner64 IMPORTS(FROM SNMPv2-SMI) -- 2022/09/26 : R19.4 Corrected qosPolicyTable,qosClassTable,qosQueueTable PICO-SMI DEFINITIONS ::= BEGIN IMPORTS enterprises, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI Counter64 FROM SNMPv2-SMI PhysAddress, TimeStamp, DisplayString FROM SNMPv2-TC OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 Ipv6Address FROM IPV6-TC ifIndex, InterfaceIndex FROM IF-MIB isdnLapdOperStatus FROM ISDN-MIB; -- The following definition is privately defined for pico Private MIB -- org OBJECT IDENTIFIER ::= { iso 3 } -- dod OBJECT IDENTIFIER ::= { org 6 } -- internet OBJECT IDENTIFIER ::= { dod 1 } -- private OBJECT IDENTIFIER ::= { internet 4 } -- enterprises OBJECT IDENTIFIER ::= { private 1 } nec OBJECT IDENTIFIER ::= { enterprises 119} -- sysObjectID -- -- The PICO Software Products. -- necProduct OBJECT IDENTIFIER ::= { nec 1 } pico OBJECT IDENTIFIER ::= { necProduct 84 } -- nec MIB nec-mib OBJECT IDENTIFIER ::= { nec 2 } necProductDepend OBJECT IDENTIFIER ::= { nec-mib 3 } -- -- pico Private MIB -- pico-mib OBJECT IDENTIFIER ::= { necProductDepend 84 } picoOriginal OBJECT IDENTIFIER ::= { pico-mib 1 } picoSystem OBJECT IDENTIFIER ::= { pico-mib 2 } picoIpSecFlowMonitorMIB OBJECT IDENTIFIER ::= { pico-mib 3 } picoLoginMIB OBJECT IDENTIFIER ::= { pico-mib 4 } picoConfigEventMIB OBJECT IDENTIFIER ::= { pico-mib 5 } picoExtIfMIB OBJECT IDENTIFIER ::= { pico-mib 6 } picoNetworkMonitorMIB OBJECT IDENTIFIER ::= { pico-mib 7 } picoIsdnMIB OBJECT IDENTIFIER ::= { pico-mib 8 } picoNgnMIB OBJECT IDENTIFIER ::= { pico-mib 9 } picoPostMIB OBJECT IDENTIFIER ::= { pico-mib 10 } picoMobileMIB OBJECT IDENTIFIER ::= { pico-mib 11 } picoIPv4MIB OBJECT IDENTIFIER ::= { pico-mib 12 } picoIPv6MIB OBJECT IDENTIFIER ::= { pico-mib 13 } picoQoSMIB OBJECT IDENTIFIER ::= { pico-mib 14 } picoNAPTMIB OBJECT IDENTIFIER ::= { pico-mib 15 } -- Equipment Temperature MIB picoTemperature OBJECT IDENTIFIER ::= { picoSystem 1 } picoCelsius OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the temperature of the equipment inside, in degree (Celsius)." ::= { picoTemperature 1 } picoFahrenheit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the temperature of the equipment inside, in degree (Fahrenheit)." ::= { picoTemperature 2 } -- Equipment Voltage MIB picoVoltage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the observed voltage, in milli-volt (mV)." ::= { picoSystem 2 } -- Fan module table picoFanTable OBJECT-TYPE SYNTAX SEQUENCE OF PicoFanEntry ACCESS not-accessible STATUS optional DESCRIPTION "The table of fan status." ::= { picoSystem 3 } picoFanEntry OBJECT-TYPE SYNTAX PicoFanEntry ACCESS not-accessible STATUS optional DESCRIPTION "Fan module entry." INDEX { picoFanIndex } ::= { picoFanTable 1 } PicoFanEntry ::= SEQUENCE { picoFanIndex INTEGER, picoFanStatus INTEGER, picoFanRpm INTEGER } picoFanIndex OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS optional DESCRIPTION "Unique index for each fan module." ::= { picoFanEntry 1 } picoFanStatus OBJECT-TYPE SYNTAX INTEGER { normal(1),failure(2) } ACCESS read-only STATUS optional DESCRIPTION "Status of a fan module" ::= { picoFanEntry 2 } picoFanRpm OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "Fan speed (Revolution Per Minutes). picoFanRpm will be set to 0 if Fan speed is less than 5294(rpm)." ::= { picoFanEntry 3 } -- PowerSupply module table picoPowerSupplyTable OBJECT-TYPE SYNTAX SEQUENCE OF PicoPowerSupplyEntry ACCESS not-accessible STATUS optional DESCRIPTION "The table of Power Supply module status." ::= { picoSystem 4 } picoPowerSupplyEntry OBJECT-TYPE SYNTAX PicoPowerSupplyEntry ACCESS not-accessible STATUS optional DESCRIPTION "System Power Supply module entry." INDEX { picoPowerSupplyIndex } ::= { picoPowerSupplyTable 1 } PicoPowerSupplyEntry ::= SEQUENCE { picoPowerSupplyIndex INTEGER, picoPowerSupplyType INTEGER, picoPowerSupplyStatus INTEGER } picoPowerSupplyIndex OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS read-only STATUS optional DESCRIPTION "Unique index for each power supply module." ::= { picoPowerSupplyEntry 1 } picoPowerSupplyType OBJECT-TYPE SYNTAX INTEGER { notInstalled(0), systemACPS(1), ieee802dot3af-PoE-ACPS(2) } ACCESS read-only STATUS optional DESCRIPTION " Power supply module type." ::= { picoPowerSupplyEntry 2 } picoPowerSupplyStatus OBJECT-TYPE SYNTAX INTEGER { notInstalled(0),normal(1),failure(2) } ACCESS read-only STATUS optional DESCRIPTION "Status of a Power Supply module." ::= { picoPowerSupplyEntry 3 } -- Equipment Sched MIB picoSched OBJECT IDENTIFIER ::= { picoSystem 5 } picoSchedRtUtl1Sec OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the observed system utilization for last 1 second, in percent (%)." ::= { picoSched 1 } picoSchedRtUtl5Sec OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the observed system utilization for last 5 seconds, in percent (%)." ::= { picoSched 2 } picoSchedRtUtl1Min OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the observed system utilization for last 1 minute, in percent (%)." ::= { picoSched 3 } picoSchedRtUtl1Hour OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the observed system utilization for last 1 hour, in percent (%)." ::= { picoSched 4 } -- Equipment Heap Memory MIB picoHeap OBJECT IDENTIFIER ::= { picoSystem 6 } picoHeapSize OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the observed total heap size, in bytes." ::= { picoHeap 1 } picoHeapUtil OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the observed current heap utilization, in percent (%)." ::= { picoHeap 2 } -- Equipment Login MIB picoLoginSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF PicoLoginSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of login session." ::= { picoLoginMIB 1 } picoLoginSessionEntry OBJECT-TYPE SYNTAX PicoLoginSessionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Login session entry." INDEX { picoLoginSessionIndex } ::= { picoLoginSessionTable 1 } PicoLoginSessionEntry ::= SEQUENCE { picoLoginSessionIndex INTEGER, picoLoginSessionStatus INTEGER, picoLoginSessionPrivilege INTEGER, picoLoginSessionProcessMode INTEGER, picoLoginSessionTerminalType INTEGER, picoLoginSessionPeerIpAddress IpAddress, picoLoginSessionPeerIpv6Address Ipv6Address } picoLoginSessionIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS not-accessible STATUS mandatory DESCRIPTION "Unique index for each login." ::= { picoLoginSessionEntry 1 } picoLoginSessionStatus OBJECT-TYPE SYNTAX INTEGER { login(1), logout(2), fail(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of a login session." ::= { picoLoginSessionEntry 2 } picoLoginSessionPrivilege OBJECT-TYPE SYNTAX INTEGER { administrator(1), monitor(2), operator(3), unknown(4) } ACCESS read-only STATUS mandatory DESCRIPTION "User privilege of a login session." ::= { picoLoginSessionEntry 3 } picoLoginSessionProcessMode OBJECT-TYPE SYNTAX INTEGER { operation(1), configure(2) } ACCESS read-only STATUS mandatory DESCRIPTION "User process status of a login session." ::= { picoLoginSessionEntry 4 } picoLoginSessionTerminalType OBJECT-TYPE SYNTAX INTEGER { unknown(1), local(2), remote(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Terminal type of a login session." ::= { picoLoginSessionEntry 5 } picoLoginSessionPeerIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Peer ipv4 address of a login session." ::= { picoLoginSessionEntry 6 } picoLoginSessionPeerIpv6Address OBJECT-TYPE SYNTAX Ipv6Address ACCESS read-only STATUS mandatory DESCRIPTION "Peer ipv6 address of a login session." ::= { picoLoginSessionEntry 7 } -- Equipment Configuration MIB picoConfigType OBJECT-TYPE SYNTAX INTEGER { default-config(1), startup-config(2), license(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Configuration type." -- this object is used only for the trap ::= { picoConfigEventMIB 1 } picoConfigEventType OBJECT-TYPE SYNTAX INTEGER { write(1), erase(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Event type of configuration modified." -- this object is used only for the trap ::= { picoConfigEventMIB 2 } -- Equipment Extension Card SwHub MIB picoExtIfTable OBJECT-TYPE SYNTAX SEQUENCE OF PicoExtIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of interface entries." ::= { picoExtIfMIB 1 } picoExtIfEntry OBJECT-TYPE SYNTAX PicoExtIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An interface entry containing objects at the subnetwork layer and below for a particular interface." INDEX { picoExtIfInstalledSlot, picoExtIfIndex } ::= { picoExtIfTable 1 } PicoExtIfEntry ::= SEQUENCE { picoExtIfInstalledSlot INTEGER, picoExtIfIndex INTEGER, picoExtIfDescr DisplayString, picoExtIfUpperLayer INTEGER, picoExtIfType INTEGER, picoExtIfSpeed INTEGER, picoExtIfDuplex INTEGER, picoExtIfEffectiveMtu INTEGER, picoExtIfPhysicalAddress PhysAddress, picoExtIfAdminStatus INTEGER, picoExtIfOperStatus INTEGER, picoExtIfLastChange TimeStamp } picoExtIfInstalledSlot OBJECT-TYPE SYNTAX INTEGER (1..16) ACCESS not-accessible STATUS mandatory DESCRIPTION "The slot number in which the extension card was installed." ::= { picoExtIfEntry 1 } picoExtIfIndex OBJECT-TYPE SYNTAX INTEGER (1..32) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique value for each extension card." ::= { picoExtIfEntry 2 } picoExtIfDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "A textual string containing information about the interface." ::= { picoExtIfEntry 3 } picoExtIfUpperLayer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of interface to upper layers." ::= { picoExtIfEntry 4 } picoExtIfType OBJECT-TYPE SYNTAX INTEGER { ethernet-csmacd(6), fastEther(62) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of interface,, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack." ::= { picoExtIfEntry 5 } picoExtIfSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An estimate of the interface's current bandwidth in bits per second." ::= { picoExtIfEntry 6 } picoExtIfDuplex OBJECT-TYPE SYNTAX INTEGER { halfduplex(1), fullduplex(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current mode of this link." ::= { picoExtIfEntry 7 } picoExtIfEffectiveMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets." ::= { picoExtIfEntry 8 } picoExtIfPhysicalAddress OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The interface's address at the protocol layer immediately `below' the network layer in the protocol stack." ::= { picoExtIfEntry 9 } picoExtIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3) -- in some test mode } ACCESS read-only STATUS mandatory DESCRIPTION "The desired state of the interface." ::= { picoExtIfEntry 10 } picoExtIfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to pass packets down(2), testing(3) -- in some test mode } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of the interface." ::= { picoExtIfEntry 11 } picoExtIfLastChange OBJECT-TYPE SYNTAX TimeStamp ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time the interface entered its current operational state." ::= { picoExtIfEntry 12 } -- Equipment Netmon MIB picoNetmonMibObjects OBJECT IDENTIFIER ::= { picoNetworkMonitorMIB 1 } picoNetmonWatchgroupTable OBJECT-TYPE SYNTAX SEQUENCE OF PicoNetmonWatchgroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of Netmon entry." ::= { picoNetmonMibObjects 1 } picoNetmonWatchgroupEntry OBJECT-TYPE SYNTAX PicoNetmonWatchgroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Netmon Watchgroup entry." INDEX { picoNetmonWatchgroupIndex } ::= { picoNetmonWatchgroupTable 1 } PicoNetmonWatchgroupEntry ::= SEQUENCE { picoNetmonWatchgroupIndex INTEGER, picoNetmonWatchgroupName DisplayString, picoNetmonWatchgroupSequenceNumber INTEGER, picoNetmonWatchgroupStatus INTEGER, picoNetmonWatchgroupVarianceCounts INTEGER } picoNetmonWatchgroupIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Unique index for each Netmon Watchgroup." ::= { picoNetmonWatchgroupEntry 1 } picoNetmonWatchgroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Netmon Watchgroup Name." ::= { picoNetmonWatchgroupEntry 2 } picoNetmonWatchgroupSequenceNumber OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Netmon Watchgroup sequence number." ::= { picoNetmonWatchgroupEntry 3 } picoNetmonWatchgroupStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), stand(2), disable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of a Netmon Watchgroup." ::= { picoNetmonWatchgroupEntry 4 } picoNetmonWatchgroupVarianceCounts OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Netmon Watchgroup variance statistics." ::= { picoNetmonWatchgroupEntry 5 } -- ISDN MIB picoIsdnMIBObjects OBJECT IDENTIFIER ::= { picoIsdnMIB 1 } -- NGN MIB -- NGN information table picoNgnMIBObjects OBJECT IDENTIFIER ::= { picoNgnMIB 1 } picoNgnTable OBJECT-TYPE SYNTAX SEQUENCE OF PicoNgnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of the NGN entry." ::= { picoNgnMIBObjects 1 } picoNgnEntry OBJECT-TYPE SYNTAX PicoNgnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NGN entry." INDEX { picoNgnIfIndex } ::= { picoNgnTable 1 } PicoNgnEntry ::= SEQUENCE { picoNgnIfIndex INTEGER, picoNgnType INTEGER, picoNgnIfType INTEGER, picoNgnStatus INTEGER, picoNgnSipServerIpAddress IpAddress, picoNgnSipUri DisplayString, picoNgnUpTime TimeTicks } picoNgnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "The interface index value of the interface for which NGN is enabled." ::= { picoNgnEntry 1 } picoNgnType OBJECT-TYPE SYNTAX INTEGER { standard(1), numbergate(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The mode of the NGN service can be: standard(1) :NGN service is standard. numbergate(2) :NGN service is numbergate. " ::= { picoNgnEntry 2 } picoNgnIfType OBJECT-TYPE SYNTAX INTEGER { global(1), private(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the NGN interface can be: global(1) :NGN interface type is global. private(2):NGN interface type is private. " ::= { picoNgnEntry 3 } picoNgnStatus OBJECT-TYPE SYNTAX INTEGER { notReady(1), initializing(2), registering(3), registered(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the NGN SIP-UA register can be: notReady(1) :NGN service is not Ready. initializing(2):During initialization of the registration. registering(3) :During registration. registered(4) :Registration complete. " ::= { picoNgnEntry 4 } picoNgnSipServerIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The object of the SIP server address." ::= { picoNgnEntry 5 } picoNgnSipUri OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The object of the SIP URI." ::= { picoNgnEntry 6 } picoNgnUpTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time elapsed since registered." ::= { picoNgnEntry 7 } -- VPN table picoNgnVpnTable OBJECT-TYPE SYNTAX SEQUENCE OF PicoNgnVpnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of the NGN VPN entry." ::= { picoNgnMIBObjects 2 } picoNgnVpnEntry OBJECT-TYPE SYNTAX PicoNgnVpnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ngn VPN entry." INDEX { picoNgnVpnIfIndex } ::= { picoNgnVpnTable 1 } PicoNgnVpnEntry ::= SEQUENCE { picoNgnVpnIfIndex INTEGER, picoNgnVpnStatus INTEGER, picoNgnVpnPeerAddress DisplayString, picoNgnVpnBandwidth INTEGER, picoNgnVpnUsedTime TimeTicks, picoNgnVpnSbcIpAddress IpAddress, picoNgnVpnSbcPort INTEGER } picoNgnVpnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "The interface index value of the interface for which NGN binding is enabled." ::= { picoNgnVpnEntry 1 } picoNgnVpnStatus OBJECT-TYPE SYNTAX INTEGER { disconnected(1), connecting(2), connected(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the NGN SIP-UA session can be: disconnected(1):SIP session is disconnected. connecting(2) :SIP session is connecting. connected(3) :SIP session is established. " ::= { picoNgnVpnEntry 2 } picoNgnVpnPeerAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The object of the NGN peer address." ::= { picoNgnVpnEntry 3 } picoNgnVpnBandwidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The object of the NGN session bandwidth." ::= { picoNgnVpnEntry 4 } picoNgnVpnUsedTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time elapsed since this connected NGN session." ::= { picoNgnVpnEntry 5 } picoNgnVpnSbcIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The object of the NGN session SBC address." ::= { picoNgnVpnEntry 6 } picoNgnVpnSbcPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The object of the NGN session SBC port." ::= { picoNgnVpnEntry 7 } -- POST-FAIL MIB picoPostMIBObjects OBJECT IDENTIFIER ::= { picoPostMIB 1 } picoPostTable OBJECT-TYPE SYNTAX SEQUENCE OF PicoPostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of POST entry." ::= { picoPostMIBObjects 1 } picoPostEntry OBJECT-TYPE SYNTAX PicoPostEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "POST entry." INDEX { picoPostIndex } ::= { picoPostTable 1 } PicoPostEntry ::= SEQUENCE { picoPostIndex INTEGER, picoPostFail DisplayString } picoPostIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "Unique index for each POST." ::= { picoPostEntry 1 } picoPostFail OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "POST fail information" ::= { picoPostEntry 2 } -- Mobile MIB picoMobileMIBObjects OBJECT IDENTIFIER ::= { picoMobileMIB 1 } -- Mobile device table picoMobileDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF PicoMobileDeviceEntry ACCESS not-accessible STATUS optional DESCRIPTION "The table of the Mobile device entry." ::= { picoMobileMIBObjects 1 } picoMobileDeviceEntry OBJECT-TYPE SYNTAX PicoMobileDeviceEntry ACCESS not-accessible STATUS optional DESCRIPTION "Mobile device entry." INDEX { picoMobileDeviceIndex } ::= { picoMobileDeviceTable 1 } PicoMobileDeviceEntry ::= SEQUENCE { picoMobileDeviceIndex INTEGER, picoMobileDeviceVendorName DisplayString, picoMobileDeviceName DisplayString, picoMobileDeviceProductID DisplayString, picoMobileDeviceSoftwareVersion DisplayString, picoMobileDeviceSignalBar INTEGER, picoMobileDeviceSignalStrength INTEGER, picoMobileDeviceSignalQuality DisplayString, picoMobileDeviceSignalElapsedTime TimeTicks, picoMobileDeviceRadioInterface DisplayString, picoMobileDeviceCarrier DisplayString, picoMobileDeviceDialerString DisplayString, picoMobileDeviceDialStatus INTEGER, picoMobileDeviceInRangeCounts Gauge, picoMobileDeviceOutRangeCounts Gauge, picoMobileDeviceResetCounts Gauge } picoMobileDeviceIndex OBJECT-TYPE SYNTAX INTEGER (1..2) ACCESS not-accessible STATUS optional DESCRIPTION "The unique index for each Mobile module." ::= { picoMobileDeviceEntry 1 } picoMobileDeviceVendorName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The object of the vendor name." ::= { picoMobileDeviceEntry 2 } picoMobileDeviceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The object of the device name." ::= { picoMobileDeviceEntry 3 } picoMobileDeviceProductID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The object of the product ID." ::= { picoMobileDeviceEntry 4 } picoMobileDeviceSoftwareVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The object of the software version." ::= { picoMobileDeviceEntry 5 } picoMobileDeviceSignalBar OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The object of the signal bar." ::= { picoMobileDeviceEntry 6 } picoMobileDeviceSignalStrength OBJECT-TYPE SYNTAX INTEGER { unknown(-1), out-range(0), weak(1), low(2), high(3) } ACCESS read-only STATUS optional DESCRIPTION "The signal strength can be: unknown(-1) :signal strength is unknown out-range(0):signal strength is 0 weak(1) :signal strength is 1 low(2) :signal strength is 2 high(3) :signal strength is 3 " ::= { picoMobileDeviceEntry 7 } picoMobileDeviceSignalQuality OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The object of the signal quality." ::= { picoMobileDeviceEntry 8 } picoMobileDeviceSignalElapsedTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS optional DESCRIPTION "The object of the elapsed time after signal acquiring." ::= { picoMobileDeviceEntry 9 } picoMobileDeviceRadioInterface OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The object of the radio interface." ::= { picoMobileDeviceEntry 10 } picoMobileDeviceCarrier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The object of the carrier name." ::= { picoMobileDeviceEntry 11 } picoMobileDeviceDialerString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS optional DESCRIPTION "The object of the dialer string." ::= { picoMobileDeviceEntry 12 } picoMobileDeviceDialStatus OBJECT-TYPE SYNTAX INTEGER { disconnected(0), connect(1), cancel(2), connected(3), postprocess(4) } ACCESS read-only STATUS optional DESCRIPTION "The dial status can be: disconnected(0):dial status is disconnected. connect(1) :dial status is connecting. cancel(2) :dial status is canceling. connected(3) :dial status is connected. postprocess(4) :dial status is postprocess. " ::= { picoMobileDeviceEntry 13 } picoMobileDeviceInRangeCounts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS optional DESCRIPTION "The in-range statistics." ::= { picoMobileDeviceEntry 14 } picoMobileDeviceOutRangeCounts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS optional DESCRIPTION "The out-range statistics." ::= { picoMobileDeviceEntry 15 } picoMobileDeviceResetCounts OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS optional DESCRIPTION "The reset device statistics." ::= { picoMobileDeviceEntry 16 } -- IPv4 MIB -- IPv4 Cache MIB picoIPv4Cache OBJECT IDENTIFIER ::= { picoIPv4MIB 1 } picoIPv4CacheEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of current IPv4 cache." ::= { picoIPv4Cache 1 } picoIPv4CachePeaks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of IPv4 cache." ::= { picoIPv4Cache 2 } picoIPv4CacheCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of created IPv4 cache." ::= { picoIPv4Cache 3 } picoIPv4CacheOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of IPv4 cache overflow." ::= { picoIPv4Cache 4 } -- IPv4 UFS Cache MIB picoIPv4UFSCache OBJECT IDENTIFIER ::= { picoIPv4MIB 2 } picoIPv4UFSCacheEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of current IPv4 UFS cache. If UFS cache is disable, this value is 0." ::= { picoIPv4UFSCache 1 } picoIPv4UFSCachePeaks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of IPv4 UFS cache. If UFS cache is disable, this value is 0." ::= { picoIPv4UFSCache 2 } picoIPv4UFSCacheCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of created IPv4 UFS cache. If UFS cache is disable, this value is 0." ::= { picoIPv4UFSCache 3 } picoIPv4UFSCacheOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of IPv4 UFS cache overflow. If UFS cache is disable, this value is 0." ::= { picoIPv4UFSCache 4 } -- IPv6 MIB -- IPv6 Cache MIB picoIPv6Cache OBJECT IDENTIFIER ::= { picoIPv6MIB 1 } picoIPv6CacheEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of current IPv6 cache." ::= { picoIPv6Cache 1 } picoIPv6CachePeaks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of IPv6 cache." ::= { picoIPv6Cache 2 } picoIPv6CacheCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of created IPv6 cache." ::= { picoIPv6Cache 3 } picoIPv6CacheOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of IPv6 cache overflow." ::= { picoIPv6Cache 4 } -- IPv6 UFS Cache MIB picoIPv6UFSCache OBJECT IDENTIFIER ::= { picoIPv6MIB 2 } picoIPv6UFSCacheEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of current IPv6 UFS cache. If UFS cache is disable, this value is 0." ::= { picoIPv6UFSCache 1 } picoIPv6UFSCachePeaks OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of IPv6 UFS cache. If UFS cache is disable, this value is 0." ::= { picoIPv6UFSCache 2 } picoIPv6UFSCacheCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of created IPv6 UFS cache. If UFS cache is disable, this value is 0." ::= { picoIPv6UFSCache 3 } picoIPv6UFSCacheOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of IPv6 UFS cache overflow. If UFS cache is disable, this value is 0." ::= { picoIPv6UFSCache 4 } -- QoS MIB -- QoS Policy Table qosPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF QoSPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of the QoS Policy entry." ::= { picoQoSMIB 1 } qosPolicyEntry OBJECT-TYPE SYNTAX QoSPolicyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "QoS Policy entry." INDEX { qosPolicyIfIndex } ::= { qosPolicyTable 1 } QoSPolicyEntry ::= SEQUENCE { qosPolicyIfIndex INTEGER, qosPolicyName DisplayString } qosPolicyIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "The interface index value of the interface for which QoS is enabled." ::= { qosPolicyEntry 1 } qosPolicyName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "QoS Policy name." ::= { qosPolicyEntry 2 } -- QoS Class Table qosClassTable OBJECT-TYPE SYNTAX SEQUENCE OF QoSClassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of the QoS Class entry." ::= { picoQoSMIB 2 } qosClassEntry OBJECT-TYPE SYNTAX QoSClassEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "QoS Class entry." INDEX { qosClassIfIndex, qosClassIndex } ::= { qosClassTable 1 } QoSClassEntry ::= SEQUENCE { qosClassIfIndex INTEGER, qosClassIndex INTEGER, qosClassName DisplayString, qosClassType INTEGER, qosClassBandwidth INTEGER, qosClassBandwidthUnit INTEGER, qosClassBitRate INTEGER, qosClassEnqPkts Counter64, qosClassEnqBytes Counter64, qosClassDeqPkts Counter64, qosClassDeqBytes Counter64, qosClassDropPkts Counter64, qosClassDropbytes Counter64 } qosClassIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "The interface index value of the interface for which QoS is enabled." ::= { qosClassEntry 1 } qosClassIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The class index value of the class" ::= { qosClassEntry 2 } qosClassName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "QoS Class name." ::= { qosClassEntry 3 } qosClassType OBJECT-TYPE SYNTAX INTEGER { cbq(1), llq(2) } ACCESS read-only STATUS optional DESCRIPTION "QoS Class type." ::= { qosClassEntry 4 } qosClassBandwidth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "QoS Class Bandwidth." ::= { qosClassEntry 5 } qosClassBandwidthUnit OBJECT-TYPE SYNTAX INTEGER { kbps(1), percent(2) } ACCESS read-only STATUS optional DESCRIPTION "QoS Class BandwidthUnit." ::= { qosClassEntry 6 } qosClassBitRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "QoS Class BitRate." ::= { qosClassEntry 7 } qosClassEnqPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Class Enqueue Packets." ::= { qosClassEntry 8 } qosClassEnqBytes OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Class Enqueue Bytes." ::= { qosClassEntry 9 } qosClassDeqPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Class Dequeue Packets." ::= { qosClassEntry 10 } qosClassDeqBytes OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Class Dequeue Bytes." ::= { qosClassEntry 11 } qosClassDropPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Class Drop Packets." ::= { qosClassEntry 12 } qosClassDropbytes OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Class Drop Bytes." ::= { qosClassEntry 13 } -- QoS Queue Table qosQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF QoSQueueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of the QoS Queue entry." ::= { picoQoSMIB 3 } qosQueueEntry OBJECT-TYPE SYNTAX QoSQueueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "QoS Queue entry." INDEX { qosQueueIfIndex, qosQueueClassIndex, qosQueueIndex } ::= { qosQueueTable 1 } QoSQueueEntry ::= SEQUENCE { qosQueueIfIndex INTEGER, qosQueueClassIndex INTEGER, qosQueueIndex INTEGER, qosQueueEnqPkts Counter64, qosQueueEnqBytes Counter64, qosQueueDeqPkts Counter64, qosQueueDeqBytes Counter64, qosQueueDropPkts Counter64, qosQueueDropbytes Counter64 } qosQueueIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "The interface index value of the interface for which QoS is enabled." ::= { qosQueueEntry 1 } qosQueueClassIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The class index value of the class" ::= { qosQueueEntry 2 } qosQueueIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "The queue index value of the queue" ::= { qosQueueEntry 3 } qosQueueEnqPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Queue Enqueue Packets." ::= { qosQueueEntry 4 } qosQueueEnqBytes OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Queue Enqueue Bytes." ::= { qosQueueEntry 5 } qosQueueDeqPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Queue Dequeue Packets." ::= { qosQueueEntry 6 } qosQueueDeqBytes OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Queue Dequeue Bytes." ::= { qosQueueEntry 7 } qosQueueDropPkts OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Queue Drop Packets." ::= { qosQueueEntry 8 } qosQueueDropbytes OBJECT-TYPE SYNTAX Counter64 ACCESS read-only STATUS mandatory DESCRIPTION "QoS Queue Drop Bytes." ::= { qosQueueEntry 9 } -- NAPT MIB -- NAPT Cache MIB picoNAPTMIBObjects OBJECT IDENTIFIER ::= { picoNAPTMIB 1 } naptCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF NaptCacheEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The table of the NAPT cache entry." ::= { picoNAPTMIBObjects 1 } naptCacheEntry OBJECT-TYPE SYNTAX NaptCacheEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "NAPT cache entry." INDEX { naptCacheIfIndex } ::= { naptCacheTable 1 } NaptCacheEntry ::= SEQUENCE { naptCacheIfIndex INTEGER, naptCacheEntries Gauge, naptCachePeak Gauge, naptCacheCreates Counter, naptCacheOverflows Counter } naptCacheIfIndex OBJECT-TYPE SYNTAX InterfaceIndex ACCESS not-accessible STATUS mandatory DESCRIPTION "The interface index value of the interface for which NAPT is enabled." ::= { naptCacheEntry 1 } naptCacheEntries OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of current NAPT cache." ::= { naptCacheEntry 2 } naptCachePeak OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The peak value of NAPT cache." ::= { naptCacheEntry 3 } naptCacheCreates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of created NAPT cache." ::= { naptCacheEntry 4 } naptCacheOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total count of NAPT cache overflow." ::= { naptCacheEntry 5 } -- -- TRAP Definitions -- picoTemperatureFault TRAP-TYPE ENTERPRISE pico DESCRIPTION "Detect a temperature failure" ::= 3 picoTemperatureRestoration TRAP-TYPE ENTERPRISE pico DESCRIPTION "Detect the restoration of temperature" ::= 4 picoVoltageFault TRAP-TYPE ENTERPRISE pico DESCRIPTION "Detect a voltage failure" ::= 5 picoVoltageRestoration TRAP-TYPE ENTERPRISE pico DESCRIPTION "Detect the restoration of voltage" ::= 6 picoFanFault TRAP-TYPE ENTERPRISE pico VARIABLES { picoFanIndex } DESCRIPTION "Detect a cooling fan failure" ::= 7 picoFanRestoration TRAP-TYPE ENTERPRISE pico VARIABLES { picoFanIndex } DESCRIPTION "Detect the restoration of cooling fan" ::= 8 picoPowerSupplyFault TRAP-TYPE ENTERPRISE pico VARIABLES { picoPowerSupplyIndex, picoPowerSupplyType } DESCRIPTION "Detect a Power Supply Module failure" ::= 9 picoPowerSupplyRestoration TRAP-TYPE ENTERPRISE pico VARIABLES { picoPowerSupplyIndex, picoPowerSupplyType } DESCRIPTION "Detect the restoration of Power Supply Module" ::= 10 picoPowerSupplyInserted TRAP-TYPE ENTERPRISE pico VARIABLES { picoPowerSupplyIndex, picoPowerSupplyType } DESCRIPTION "Detect a Power Supply Module inserted" ::= 11 picoPowerSupplyRemoved TRAP-TYPE ENTERPRISE pico VARIABLES { picoPowerSupplyIndex, picoPowerSupplyType } DESCRIPTION "Detect a Power Supply Module removed" ::= 12 picoLoginSession TRAP-TYPE ENTERPRISE pico VARIABLES { picoLoginSessionStatus, picoLoginSessionPrivilege, picoLoginSessionTerminalType, picoLoginSessionPeerIpAddress, picoLoginSessionPeerIpv6Address } DESCRIPTION "This notification is user login status" ::= 13 picoLoginFailure TRAP-TYPE ENTERPRISE pico VARIABLES { picoLoginSessionStatus, picoLoginSessionPrivilege, picoLoginSessionTerminalType, picoLoginSessionPeerIpAddress, picoLoginSessionPeerIpv6Address } DESCRIPTION "This notification is login authentication fail" ::= 14 picoConfigMode TRAP-TYPE ENTERPRISE pico VARIABLES { picoLoginSessionProcessMode, picoLoginSessionTerminalType, picoLoginSessionPeerIpAddress, picoLoginSessionPeerIpv6Address } DESCRIPTION "This notification is config process status." ::= 15 picoConfigModified TRAP-TYPE ENTERPRISE pico VARIABLES { picoConfigType, picoConfigEventType, picoLoginSessionTerminalType, picoLoginSessionPeerIpAddress, picoLoginSessionPeerIpv6Address } DESCRIPTION "This notification is configuration modified status." ::= 16 picoExtIfLinkDown TRAP-TYPE ENTERPRISE pico VARIABLES { picoExtIfAdminStatus, picoExtIfOperStatus } DESCRIPTION "This notification is port link down status." ::= 17 picoExtIfLinkUp TRAP-TYPE ENTERPRISE pico VARIABLES { picoExtIfAdminStatus, picoExtIfOperStatus } DESCRIPTION "This notification is port link up status." ::= 18 -- ++++++++++++ -- Netmon Traps -- ++++++++++++ picoNetmonMIBNotificationPrefix OBJECT IDENTIFIER ::= { picoNetworkMonitorMIB 2 } picoNetmonMIBNotifications OBJECT IDENTIFIER ::= { picoNetmonMIBNotificationPrefix 0 } picoNetMonWatchGroupStatusChange TRAP-TYPE ENTERPRISE picoNetmonMIBNotificationPrefix VARIABLES { picoNetmonWatchgroupName, picoNetmonWatchgroupSequenceNumber , picoNetmonWatchgroupStatus} DESCRIPTION "This notification is Netmon Watchgroup status change." ::= 1 -- ++++++++++++ -- ISDN Traps -- ++++++++++++ picoIsdnMIBNotificationPrefix OBJECT IDENTIFIER ::= { picoIsdnMIB 2 } picoIsdnMIBNotifications OBJECT IDENTIFIER ::= { picoIsdnMIBNotificationPrefix 0 } picoIsdnLapdOperStatusChange TRAP-TYPE ENTERPRISE picoIsdnMIBNotificationPrefix VARIABLES { ifIndex, isdnLapdOperStatus } DESCRIPTION "This trap/inform is sent to the manager whenever the D-channel of an interface changes state." ::= 3 -- +++++++++++++++ -- POST-FAIL Traps -- +++++++++++++++ picoPostMIBNotificationPrefix OBJECT IDENTIFIER ::= { picoPostMIB 2 } picoPostMIBNotifications OBJECT IDENTIFIER ::= { picoPostMIBNotificationPrefix 0 } picoPostFailMessage TRAP-TYPE ENTERPRISE picoPostMIBNotificationPrefix VARIABLES { picoPostFail } DESCRIPTION "This trap/inform is sent to the manager whenever POST fail occured." ::= 1 -- +++++++++++++++ -- Mobile Traps -- +++++++++++++++ picoMobileMIBNotificationPrefix OBJECT IDENTIFIER ::= { picoMobileMIB 2 } picoMobileMIBNotifications OBJECT IDENTIFIER ::= { picoMobileMIBNotificationPrefix 0 } picoMobileDeviceDown TRAP-TYPE ENTERPRISE picoMobileMIBNotificationPrefix VARIABLES { picoMobileDeviceIndex, picoMobileDeviceName } DESCRIPTION "This notification is port down status of USB device." ::= 1 picoMobileDeviceUp TRAP-TYPE ENTERPRISE picoMobileMIBNotificationPrefix VARIABLES { picoMobileDeviceIndex, picoMobileDeviceName } DESCRIPTION "This notification is port up status of USB device." ::= 2 picoMobileSignalStatusChange TRAP-TYPE ENTERPRISE picoMobileMIBNotificationPrefix VARIABLES { picoMobileDeviceIndex, picoMobileDeviceSignalBar, picoMobileDeviceSignalStrength, picoMobileDeviceSignalQuality, picoMobileDeviceRadioInterface } DESCRIPTION "This notification is the signal status changed." ::= 3 END