Protocol Settings - SNTP Client

On the [SNTP Client] page, you can set the parameters for an SNTP client.

To enable the settings on this page, click the [Apply] button, and switch the scanner off and then on again.

SNTP Server Address
Enter the IP address of the SNTP server in a format of "aaa.bbb.ccc.ddd". The "aaa", "bbb", "ccc", and "ddd" represent the numbers between 0 and 254. However, 127 and 224 to 254 cannot be used for "aaa".

Refresh Interval
Enter the interval at which the SNTP client obtains time from the SNTP server. The interval can be entered in the range between 1 and 500 hours.

[Apply] button
[Undo] button