Port Settings - Ethernet

On the [Ethernet] page, you can set the parameters for Ethernet.

Ethernet Settings
Select the communication speed of Ethernet from the following.
To enable this setting, click the [Apply] button, and switch the scanner off and then on again.


• [Auto]
  Automatically detects the communication speed of Ethernet and Duplex.
  
• [10Base-T Half-Duplex]
  Select this when Ethernet is fixed at 10 Base-T Half-Duplex.
  
• [10Base-T Full-Duplex]
  Select this when Ethernet is fixed at 10Base-T Full-Duplex.
  
• [100Base-TX Half-Duplex]
  Select this when Ethernet is fixed at 100Base-TX Half-Duplex.
  
• [100Base-TX Full-Duplex]
  Select this when Ethernet is fixed at 100Base-TX Full-Duplex.

Current Ethernet Settings
Displays the current communication speed of Ethernet.

MAC Address
Displays the MAC address. This cannot be changed.

[Apply] button
[Undo] button