Port Status

This page allows you to enable or disable each port. Set all ports you want to use to [Enabled].

The ports displayed differ depending on the model of your printer and the options installed.
The following settings will become valid after rebooting the printer from CentreWare Internet Services or manually switching it off and then on again.

LPD
Select [Enabled] or [Disabled].

Port9100
Select [Enabled] or [Disabled].

IPP
Select [Enabled] or [Disabled].

FTP
Select [Enabled] or [Disabled].

SMB
Select [Enabled] or [Disabled], and configure the transport protocol to be used. TCP/IP and NetBEUI can be selected simultaneously as the transport protocol.

NetWare
Select [Enabled] or [Disabled], and configure the transport protocol to be used. IPX/SPX and TCP/IP can be selected simultaneously as the transport protocol.

EtherTalk
Select [Enabled] or [Disabled].

Bonjour
Select [Enabled] or [Disabled].

SNMP
Select [Enabled] or [Disabled], and configure the transport protocol to be used. UDP and IPX can be selected simultaneously as the transport protocol.

StatusMessenger
Select [Enabled] or [Disabled].

E-mail Print
Select [Enabled] or [Disabled].

[Apply] button
[Undo] button