Port Status

This page allows you to enable or disable each port. Set all ports you want to use to [Enabled].

The following settings will become valid after you reboot the printer from CentreWare Internet Services or manually switch it off and then on again.

LPD
To enable the port, place a checkmark in the [Enabled] checkbox.

Port 9100
To enable the port, place a checkmark in the [Enabled] checkbox.

IPP
To enable the port, place a checkmark in the [Enabled] checkbox.

WSD
To enable the port, place a checkmark in the [Enabled] checkbox.

FTP
To enable the port, place a checkmark in the [Enabled] checkbox.

Bonjour
To enable the port, place a checkmark in the [Enabled] checkbox.

SNMP
To enable the port, place a checkmark in the [Enabled] checkbox.

StatusMessenger
To enable the port, place a checkmark in the [Enabled] checkbox.

[Apply] button
[Undo] button