Security - Administrator Settings

This page allows you to configure the Administrator mode.

Administrator Mode
If you want to permit only the administrator to change settings on CentreWare Internet Services, select [Enabled]. If you want to permit all users to change settings, select [Disabled]. The default is [Enabled].
When this is set to [Enabled], you will be prompted to enter the administrator ID and password when changing settings.

Administrator Login ID
Enter the name of the administrator of CentreWare Internet Services within 8 bytes. You can use both alphanumeric characters and symbols.
Administrator ID that has already been set will not be displayed on the window.
The original setting will remain valid if no entry is made.

Administrator Password
Enter the password of the administrator of CentreWare Internet Services.
The password is displayed in 5 asterisks (*), regardless of whether it has already been set or not.
To enter a password, delete all the asterisks and then enter the password within 10 bytes using alphanumeric characters and symbols. If the text box is left blank, the original setting will remain valid.

Re-enter Password
Re-enter the password entered in [Administrator Password] for verification.

Maximum Login Attempts
Enter the maximum number of attempts to be permitted for the Administrator login between 5 and 255. To permit an unlimited number of login attempts, enter "0".

[Apply] button
[Undo] button