Security - 802.1x

This page allows you to configure IEEE 802.1x.

This feature is not available if the network does not support IEEE 802.1x.
The following settings will become valid after you reboot the printer from CentreWare Internet Services or manually switch it off and then on again.

Enable IEEE 802.1x
To enable authentication with IEEE 802.1x, select [Enabled].

Authentication Method
Select a type of IEEE 802.1x authentication.

Login Name: (Device Name)
Enter a user name for IEEE 802.1x authentication using up to 128 alphanumeric characters.

Password
Enter a password for IEEE 802.1x authentication using up to 128 alphanumeric characters.

Re-enter Password
Re-enter the password entered in [Password] for verification.

[Apply] button
[Undo] button