Port Settings - Wireless

This page allows you to configure the wireless network settings.
To connect the printer with a wireless network, be sure to disconnect the Ethernet cable.

Wireless LAN
Select this check box to use wireless LAN.


SSID
Enter the name that identifies the wireless network within 32 bytes.


Network Type
Select the network type from drop-down list.


MAC Address
Displays the current MAC address of the printer.


Connection Channel
Displays the channel number of the connection.


Connection Quality
Displays the quality of the connection.

Security Settings
Encryption
Select the security method from drop-down list.


• Off
  Select this to communicate without encryption.



• WEP 128-bit HEX (26 Bytes)
  Select this to use the WEP 128-bit HEX (26 Bytes).



• WEP 128-bit ASCII (13 Bytes)
  Select this to use the WEP 128-bit ASCII (13 Bytes).



• WEP 64-bit HEX (10 Bytes)
  Select this to use the WEP 64-bit HEX (10 Bytes).



• WEP 64-bit ASCII (5 Bytes)
  Select this to use the WEP 64-bit ASCII (5 Bytes).



• WPA-PSK AES/WPA2-PSK AES
  Select this to use the WPA-PSK AES/WPA2-PSK AES.



• WPA-PSK TKIP
  Select this to use the WPA-PSK TKIP.

WEP
Transmit Key
Select the WEP key number from drop-down list.


WEP Key 1
WEP Key 2
WEP Key 3
WEP Key 4
Enter the WEP key within 26 bytes.


Re-enter WEP Key 1
Re-enter WEP Key 2
Re-enter WEP Key 3
Re-enter WEP Key 4
Enter the WEP key again for confirmation.

WPA-PSK
This setting is valid when [WPA-PSK AES/WPA2-PSK AES] or [WPA-PSK TKIP] is selected in [Encryption].


Passphrase
Enter the passphrase within 63 bytes.


Re-enter Passphrase
Enter the passphrase again for confirmation.

[Apply] button
[Undo] button