Protocol Settings - WSD

This page allows you to configure WSD (Web Services on Devices) settings.
This page appears if your printer supports WSD.
The following settings will become active after rebooting the printer from CentreWare Internet Services or manually turning off and on the printer.
If the optional hard disk unit is not installed on your printer, note that the data in the memory are cleared when the printer is turned off.
WSD stands for Web Services on Devices.

Port Number
Enter the WSD port number. The port number should be 80 or any number between 8000 and 9999. The default is 80.
Do not use the same number as the Port9100/HTTP/SSL port number.

Data Receive Timeout
Specify the connection timeout of WSD within the range of 1 to 65,535 seconds. During data reception, the printer waits for incoming data. When the specified timeout period elapses with no data coming in, the connection is terminated.

Notification Delivery Timeout
Specify the connection timeout of WSD within the range of 1 to 60 seconds. During notification delivery, the printer waits for incoming data. When the specified timeout period elapses with no data coming in, the connection is terminated.

Maximum TTL
Specify the maximum TTL of a WSD communication packet within the range of 1 to 10.

Maximum number of subscribers
Specify the maximum number of WSD subscribers within the range of 10 to 20.

[Apply] button
[Undo] button