[SNMP]
Configure the settings for SNMP (Simple Network Management Protocol).
[SNMP v3] is valid when [SSL/TLS Communication] is enabled.
[Port]
Set whether to enable the use of the SNMP protocol.
[Authentication Failure Generic Traps]
This item is displayed when [Port] is enabled.
Set whether notification is sent when SNMP authentication fails.
[SNMP v1/v2]
This item is displayed when [Port] is enabled.
Set whether to enable SNMP v1/v2c. To edit the settings, click the item name to display the [SNMP v1/v2] dialog box.
[SNMP v3]
This item is displayed when [Port] is enabled.
Set whether to enable SNMP v3. To edit the settings, click the item name to display the [SNMP v3] dialog box.
[SNMP Trap Destinations]
Lists the members to which traps are sent. Clicking a member or [<Available>] displays the dialog box for editing traps.
[Edit Trap 1] to [Edit Trap 8] Dialog Boxes
[Enable]
Indicates whether the trap destination is enabled/disabled. The following items are displayed only when this item is enabled.
[SNMP Version]
Set the SNMP version.
[Address Type]
Set the type of destination addresses to which traps are sent.
[IP Address or Host Name]
Enter the IP address or host name, and the port number (UDP).
[Traps Community Name]
Set the community name used when traps are sent. This item is displayed when [SNMP Version] is set to [v1] or [v2c].
[Trap User Name]
Set the user name used when traps are sent. This item is displayed when [SNMP Version] is set to [v3].
[Traps to be Received]
For each item, set whether to notify of the occurrence of traps.