[HTTP]
Configure the settings for the HTTP protocol.
This setting takes effect after the printer is restarted from Internet Services, or is turned off and then on again from the printer's control panel.
[Port (HTTP/HTTPS)]
Set whether to enable HTTP/HTTPS.
[Port Number (HTTP)]/[Port Number (HTTPS)]
Enter the number of the port that receives requests from your web browser.
Do not use the same port number as that for other protocols.
[Maximum Connections per Port]
Set the maximum number of sessions allowed for concurrent connections.
[Connection Timeout]
Set the connection timeout time.
[Keep Alive Timeout]
Displays the Keep Alive timeout time.
[Device Certificate]
Displays the certificate to be used for connection.
[CSRF Protection]
Set whether to enable protection against CSRF (Cross Site Request Forgeries).
CSRF is an attack used to trick computers that visited a malicious/compromised website into performing certain operations on other websites. This feature avoids Internet Services from being targeted by unwanted operations and thus the printer's settings are changed in case you unexpectedly access a malicious website.
When [CSRF Protection] is enabled, verifying HTTP Referrer is done. Depending on your network environment, Internet Services might become unavailable.
[Internet Services Settings]
[Port]
Set whether to enable Internet Services.
[Proxy Server]
Set whether to enable the use of the proxy server.
[Proxy Server Settings]
This item is displayed when [Proxy Server] is enabled.
Configure the settings for the proxy server.
This item is displayed for multi-interface.
[Use Proxy Server]
Set whether to enable the use of the proxy server for each network interface.
This item is displayed when Proxy Server Settings is set to [Different Proxy for Each Interface].
[Proxy Server Setup]
Displays how the proxy server is specified.
[Enter Automatic Proxy Configuration Script URL]
Enter the URL for the Proxy Automatic Configuration (PAC) file.
This item is displayed when Proxy Server Setup is set to "Use Automatic Proxy Configuration Script".
[Proxy Server]
[Server Address]
Set the address of the proxy server.
The address can be set for HTTP and HTTPS separately.
[Authentication]
This item is displayed when [Proxy Server] is enabled.
Set whether to enable the password to authenticate against the proxy server.
[Login Name]
Enter the login name for authentication against the proxy server. This field cannot be left blank.
[Password]
Enter the login password for authentication against the proxy server. This field cannot be left blank.
[Retype Password]
Enter the same string as that you entered in [Password].
[Address to Bypass Proxy Server]
This item is displayed when [Proxy Server Setup] is set to [Same Proxy for All Protocols] or [Different Proxy for Each Protocol].
Enter addresses that bypass the proxy server.