[USB]
Configure the settings related to USB such as enabling USB, selecting print mode, and setting auto-eject time.
[Enable]
Set whether to enable USB communication.
[Serial Number to Display During Plug & Play]
Set the format of serial number returned from the device to the client when USB is connected to the printer to either a value unique to the product or a 10-digit fixed value (9999999999).
[Device (Front)]/[Device (Rear)]
Set whether to enable the USB Type-A/Type-B port.
This item is displayed when the USB Type-A/Type-B port exist at the front /rear of the printer.
If you change from Enable to Disable, the message "Make sure that no device is connected to the USB port to be disabled." appears.
[USB-B]
This item is displayed when you enable the USB Type-B port.
[PJL]
Set whether to enable actions to detect commands for switching to PJL (XJCL).
[Print Mode]
Set the print language.
Only the print languages supported by the printer are displayed.
[Auto Eject Time]
Set the time period from the moment when data stream sent to the printer ceases, to the moment when the printer ejects paper automatically, in the rage between 5 and 1275 seconds in increments of 5 seconds.
[Adobe Communication Protocol]
Set the Adobe Communication Protocol.
This item is displayed when the printer is equipped with the optional Adobe PostScript 3 Kit.
[PostScript Wait Timeout (RAW Mode)]
Set whether to use the Timeout value set for PS as the job timeout value when Adobe Protocol is running PostScript jobs in raw mode.
This item is displayed when the printer is equipped with the optional Adobe PostScript 3 Kit.