Protocol Settings - WSD
This page allows you to configure WSD (Web Services on Devices) settings.
This page does not appear if your printer does not support WSD.
Port Number
Enter the WSD port number. The port number should be 80 or any number between 8000 and 9999. The default is 80.
This setting will become valid after rebooting the printer from CentreWare Internet Services or manually switching it off and then on again.
Data Receive Time-Out
Specify the connection time-out of WSD within the range of 1 to 65,535 seconds. During data reception, the printer waits for incoming data. When the specified time-out period elapses with no data coming in, the connection is terminated.
Notification Delivery Time-Out
Specify the connection time-out of WSD within the range of 1 to 60 seconds. During notification delivery, the printer waits for incoming data. When the specified time-out period elapses with no data coming in, the connection is terminated.
Maximum TTL
Specify the maximum TTL of a WSD communication packet within the range of 1 to 10.
Maximum Number of Subscribers
Specify the maximum number of WSD subscribers within the range of 10 to 20.
[Apply] button
[Undo] button