Port Status

This page displays the port settings and allows you to enable or disable different ports used in the printer. Ports to be used will be set to Enabled.

The port displayed will differ depending on the printer model and the options installed.
The setting for this item will be valid only when the device is restarted. Click the [Apply New Settings and Reboot Device] button to restart the device.

LPD
Selects [Enable] or [Disable].

Port9100
Selects [Enable] or [Disable].

IPP
Selects [Enable] or [Disable].

FTP
Selects [Enable] or [Disable].

SMB
Selects [Enable] or [Disable]. You can also configure the transport protocol to be used. TCP/IP and NetBEUI can be selected simultaneously as the transport protocol.

NetWare
Selects [Enable] or [Disable].

SNMP
Selects [Enable] or [Disable]. You can also configure the transport protocol to be used. UDP and IPX can be selected simultaneously as the transport protocol.

StatusMessenger
Selects [Enable] or [Disable].

[Apply New Settings] button
[Apply New Settings and Reboot Device] button
[Restore Settings] button
[Refresh] button