Protocol Settings - HTTP

This page allows you to configure the HTTP protocol settings for CentreWare Internet Services.

Port Number
Enter the port number which accepts requests from your web browser. Enter 80 or any number between 8000 and 9999.
Do not use the same number as the Port9100/WSD/SSL port number.
This setting will become active after rebooting the printer. You can reboot the printer from CentreWare Internet Services or by manually turning the printer off and on.
If the optional hard disk unit is not installed on your printer, note that the data in the memory is cleared when the printer is turned off.
WSD stands for Web Services on Devices.

Maximum number of sessions
Displays the number of sessions accepted simultaneously by CentreWare Internet Services.

Connection Timeout
Set the time to wait for a response from the web browser. The timeout period can be set within the range of 1 to 255 seconds.

[Apply] button
[Undo] button