Enter the community name. Control characters are not available. The following characters can be entered:
Enter a read only community name. The default community name is "public".
Enter a read/write community name. The default community name is "private".
Enter a trap community name. The default community name is "SNMP_trap".
Note
See Also
Select the address type of the destination to be notified of trap occurrences.
If [Off] is selected, trap occurrences are not notified, and any address entered in [Trap Destination Address] is deleted when the setting is saved.
Enter the IP address according to [Trap Address Type].
Enter the port number (UDP).
Specify whether to notify trap occurrences.
Select the trap destination. This item appears when the printer is connected to a wireless network and Wi-Fi Direct is enabled.
Specify whether to notify the authentication error trap.
See Also