[SNTP] Dialog Box
You can configure the settings for SNTP.
Note
This setting becomes available when you restart the printer from Internet Services or manually turn off and on the printer on the operator panel of the printer.
[Time Server Synchronization]
Specify whether to synchronize the printer with the time server.
[Time Server Address]
This item appears when synchronizing the printer with the time server.
Enter the server address. The following characters can be entered:
- Up to 255 bytes (single-byte only)
- Alphanumeric characters, periods (.), hyphens (-), and colons (:)
[Timeout]
This item appears when synchronizing the printer with the time server.
Enter the timeout period to wait for a response from the server.
[Time Synchronization Interval]
This item appears when synchronizing the printer with the time server.
Enter the time interval for synchronizing the time on the printer.