[SNMP v1/v2] Dialog Box
This setting becomes available when you restart the printer from Internet Services or manually turn off and on the printer on the operator panel of the printer.
[Enable]
Specify whether to enable SNMP v1/v2.
[Community Names]
This item appears when SNMP v1/v2 is enabled.
[Community Name Read Only]
Enter a read only community name. The default community name is "public".
[Community Name Read/Write]
Enter a read/write community name. The default community name is "private".
[Trap Community Name]
Enter a trap community name. The default community name is "SNMP_trap".
[Trap Destination]
This item appears when SNMP v1/v2 is enabled.
Lists the addresses of the destination to be notified of trap occurrences. Clicking the destination or [(Available)] displays the editing trap dialog box.
[Trap Destination 1] to [Trap Destination 4] Dialog Box
[IP Address : Port]
Text Box on the Left
Enter the IP address according to [Type].Text Box on the Right
Enter the port number (UDP).
[Traps Community Name]
Set the community name used when traps are sent.
[Trap to be Received]
Specify whether to notify trap occurrences.
[Traps to Be Received]
For each item, set whether to notify of the occurrence of traps.