[SMB] Dialog Box
You can configure the settings for SMB.
Important
The printer does not support specifying printers with WINS and NetBIOS names.
Use an IP address or FQDN to specify a printer.
[Host Name]
Enter the name of the host.
[Workgroup]
Enter the name of the workgroup.
[WINS Server Address Acquisition by DHCP]
Specify whether to obtain the primary and secondary WINS server address via DHCP.
Note
To enable this setting, select [Network] > [Ethernet] > [IPv4], and set [Mode] to [DHCP].
See Also
[Primary WINS Server Address]
Enter the WINS server address.
[Secondary WINS Server Address]
Enter the back-up WINS server address.