[Wi-Fi Direct]
You can specify the communication environment via Wi-Fi Direct.
- Wi-Fi Direct cannot be used in an IPv6 or Ad-hoc environment.
- This setting becomes available when you restart the printer from Internet Services or manually turn off and on the printer on the operator panel of the printer.
［Wi-Fi Direct］
[Enable]
Specify whether to enable the Wi-Fi Direct connection.
Wi-Fi Direct Connection Status
The status appears when Wi-Fi Direct is enabled.
- [Paired Device]: Displays the number of mobile devices currently connected.
- [Current Role]: Displays the current group role of the printer.
- [Current SSID]: Displays the current SSID.
[Group Role]
This item appears when Wi-Fi Direct is enabled.
Select the group role of the printer.
[Device Name]
This item appears when [Auto] is selected for [Group Role].
Enter the printer name that identifies the Wi-Fi Direct network. The following characters can be entered:
- Up to 32 bytes (single-byte only)
- Alphanumeric characters and symbols
[DHCP Server]
This item appears when Wi-Fi Direct is enabled.
[IP Address]
Displays the IP address of the printer when connected using Wi-Fi Direct. To change the IP address, enter a new IP address.
[Subnet Mask]
Displays the subnet mask of the printer when connected using Wi-Fi Direct. To change the subnet mask, enter a new subnet mask.
[Group Owner]
This item appears when Wi-Fi Direct is enabled and [Group Owner] is selected for [Group Role].
Displays the current group owner.
[SSID]
Enter the name to be identified over the Wi-Fi Direct network. A null cannot be set. The following characters can be entered:
- Up to 23 bytes (single-byte only)
- Alphanumeric characters and symbols
[Passcode]
Displays the passcode. Confirm it when you enter the passcode into your Wi-Fi mobile device.