[Port 9100] Dialog Box
You can configure the settings for Port9100.
Note
This setting becomes available when you restart the printer from Internet Services or manually turn off and on the printer on the operator panel of the printer.
[Port]
Specify whether to enable Port9100.
[Port Number]
This item appears when [Port] is enabled.
Enter the Port9100 port number. The default value is "9100".
Important
Do not use the same port number as other protocols.
[Timeout]
This item appears when [Port] is enabled.
Enter the connection timeout period of Port9100 protocol. If the reception of data stops during the transfer, the connection to the printer is terminated after the time period specified here elapses.