[POP3] Dialog Box
You can configure the settings for POP3.
[IP Address/Host Name : Port]
Enter the address of the incoming e-mail server to be connected via POP3 protocol and the port number.
Text Box on the Left
Enter the address of the incoming e-mail server to be connected via POP3 protocol. The following characters can be entered:- IP address or FQDN (Fully Qualified Domain Name) format
- Up to 63 bytes (single-byte only)
- Alphanumeric characters, periods (.), and hyphens (-)
Text Box on the Right
Enter the port number to be used on the POP3 server.
[Password Encryption]
Specify whether to encrypt the password.
[User Name]
Enter the user name for the incoming e-mail server. The following characters can be entered:
- Up to 63 bytes (single-byte only)
- Alphanumeric characters, periods (.), hyphens (-), underscores (_), and the @ mark
[Password]
Enter the password for the incoming e-mail server. A null cannot be set. The following characters can be entered:
- Up to 31 bytes (single-byte only)
- Alphanumeric characters and symbols
[Retype Password]
Enter the same character string in [Password].
[Polling Interval]
Enter the time interval for polling.
[Permitted Email Address]
[Email Address 1] to [Email Address 4]
To impose restrictions on e-mail reception, enter the e-mail addresses that you permit to receive e-mails from. If none is specified, all e-mails are permitted.
The following characters can be entered:
- Up to 31 bytes (single-byte only)
[StatusMessenger Password]
[Password]
Enter the password to access to the StatusMessenger function via an e-mail received. If you do not want to set the password, leave the text box blank. The following characters can be entered:
- Up to 7 bytes (single-byte only)
- Alphanumeric characters
[Retype Password]
Enter the same character string in [Password].
[Print Job Password]
[Password]
Enter the password when you print out the e-mail attachments received by the printer. If you do not want to set the password, leave the text box blank. The following characters can be entered:
- Up to 7 bytes (single-byte only)
- Alphanumeric characters
[Retype Password]
Enter the same character string in [Password].