[SNMP v3]
Note
- This setting becomes available when you reboot the printer from CentreWare Internet Services or manually turn off and on the printer after clicking [Apply].
[Administrator Account]
[Account Enabled]
Specify whether to enable account access. Selecting [Enabled] enables the system administrator account.
[User Name]
Displays the user name of the system administrator.
[Authentication Password (8 - 32 Bytes)]
Enter an authentication password. A null cannot be set. The following characters can be entered:
- Between 8 bytes and 32 bytes (single-byte only)
- Alphanumeric characters and symbols
Note
- Enter the same character string in the input confirmation item.
[Privacy Password (8 - 32 Bytes)]
Enter a privacy password. A null cannot be set. The following characters can be entered:
- Between 8 bytes and 32 bytes (single-byte only)
- Alphanumeric characters and symbols
Note
- Enter the same character string in the input confirmation item.
[Print Drivers / Remote Client Account]
[Account Enabled]
Specify whether to enable account access.
[Reset to default Password]
Click [Execute] to reset the password to the default.