[ThinPrint]
Configure the settings for ThinPrint.
With ThinPrint, print data is compressed on the server before it is sent to the printer, decreasing the network load.
[Port]
Set whether to use the ThinPrint protocol.
[Port Number]
Set the port number for ThinPrint.
Do not use the same port number as that for other protocols.
[TBCP Filter]
Set whether to enable the TBCP filters when processing PostScript data.
This item is displayed when PostScript is available.
[Timeout]
Set the time period from the moment when data stream sent to the printer ceases, to the moment when the printer is disconnected.
[Packet Size]
Set the paper size that the printer can receive.
[PJL]
Set whether to enable the use of the PJL switch.
[Auto Connect Settings]
[Printer Class]
Configure the settings to group multiple printers that have drivers compatible with each other. The string entered here is set as the group name.