================================================================================
NE3303-142 SAS Controller Windows Driver
                                                              (ver 2.0.75.1)
================================================================================
                                                                NEC Corporation
                                                                      Jul. 2015
[Table of contents]
1.About the software
2.Models
3.Driver install procedures  
4.Notes
5.Update history
6.Trademarks and copyright
--------------------------------------------------------------------------------

1.About the software

 "NE3303-142 SAS Controller Windows Driver" ("the Software") is a driver
(lsi_sas2.sys) that is required when using NE3303-142 in the following NEC Express5800
server.

2.Models
 Refer to NEC Express5800 Download Site.

3.Driver install procedures

 Perform the following steps to install the driver.

 -Confirm Driver version:
  
  (1) Boot the system and log in(sign in) it with administrator.

  (2) Run Explorer and open the following folder.

      %SYSTEMROOT%\SYSTEM32\DRIVERS

      *Note*
       The default of SYSTEMROOT is C:\WINDOWS.

  (3) Open the properties of "%SYSTEMROOT%\SYSTEM32\DRIVERS\lsi_sas2.sys".

  (4) Click [Details] tab and confirm the [File version].

  (5) When the File version is under2.0.75.1, you need to update 
      SAS Controller driver.
      When the File version is 2.0.75.01 or more, you don't need to 
      update SAS Controller driver.

 -Install the driver:

  (1) Download 321028-A01_xxxxxx.zip(xxxxx is an expression of arbitrary numbers)
      to any directory. (for example, "C:\TEMP" folder) 

  (2) Unzip 321028-A01_xxxxxx.zip(xxxxx is an expression of arbitrary numbers).
      Note: In the folder where you unzipped, do not use folder names 
            that contain space(" ").

  (3) Execute Update.vbs(unziped files) using an appropriate tool 
      such as Explorer.

  (4) The following message appears. Click [Yes].
      [Do you want to setup the SAS controller driver?]

  (5) The following message appears. Reboot the system after click [OK].
      [This setup finished successfully. Please restart the system.]

  (6) After reboot the system, confirm the File version following procedure.

      1) Run Explorer and open the following folder.
         %SYSTEMROOT%\SYSTEM32\DRIVERS
      2) Open the properties of "%SYSTEMROOT%\SYSTEM32\DRIVERS\lsi_sas2.sys".
      3) Click [Details] tab and confirm the [File version].
      4) Confirm to the Product version is 2.0.75.1.

4.Notes

5.Update history
  Jul. 2015
  <Bug fix>
   1) Stop error rarely occur, after issuing Inquiry command to TAPE drive with
      NE3303-142.

6.Trademarks and copyright
  *c 2015 Avago Technologies. All rights reserved.
  *Microsoft, Windows, and Windows Server are registered trademarks or trademarks of
   Microsoft Corporation in the United States and other countries.
  *All other product, brand, or trade names used in this publication are the 
   trademarks or registered trademarks of their respective trademark owners.
